浏览全部资源
扫码关注微信
江苏科技大学 机械工程学院, 江苏 镇江 212100
鲍成(1991— ),男,安徽安庆人,硕士;主要研究方向为机电一体化技术、机器人设计;245782183@qq.com。
刘芳华(1972— ),女,江苏镇江人,博士,教授,硕士研究生导师;主要研究方向为机电系统工程与一体化技术、多体动力学及机器人技术和微机控制及自动化技术;cylfhua@163.com。
纸质出版日期:2024-06-15,
收稿日期:2023-04-01,
修回日期:2023-04-29,
扫 描 看 全 文
鲍成,刘芳华,曹永鑫等.一种球面耦合颈椎康复机器人结构设计与分析[J].机械传动,2024,48(06):169-176.
Bao Cheng,Liu Fanghua,Cao Yongxin,et al.Structure Design and Simulation of a Spherical Coupled Cervical Spine Rehabilitation Robot[J].Journal of Mechanical Transmission,2024,48(06):169-176.
鲍成,刘芳华,曹永鑫等.一种球面耦合颈椎康复机器人结构设计与分析[J].机械传动,2024,48(06):169-176. DOI: 10.16578/j.issn.1004.2539.2024.06.025.
Bao Cheng,Liu Fanghua,Cao Yongxin,et al.Structure Design and Simulation of a Spherical Coupled Cervical Spine Rehabilitation Robot[J].Journal of Mechanical Transmission,2024,48(06):169-176. DOI: 10.16578/j.issn.1004.2539.2024.06.025.
针对国内外各种颈椎康复机构存在的结构、体积、功能和穿戴性方面的问题,提出一种球面耦合颈椎康复机器人方案。首先,从颈椎病患者常用康复动作出发,按照人体颈部生理结构和运动学机制,设计了一种新型球面耦合机构,旨在更好地实现患者的头颈部康复训练;然后,使用螺旋理论进行机构自由度分析,建立机器人运动学和动力学模型,得到了机构运动学求解公式和动力学方程,通过Matlab仿真得到机构运动空间,验证其满足康复训练所需空间要求;在Adams中通过模型动作编写了step函数,将运动学仿真得到的曲线图与理论计算结果进行了对比分析;最后,通过Ansys Workbench对机器人关键零部件进行瞬态动力学分析,得到机构应力云图,验证了其结构设计合理性,为样机搭建和控制策略研究奠定了基础。
Aiming at the problems of structure
volume
function and wearability of various cervical spine rehabilitation institutions at home and abroad
a spherical coupled cervical spine rehabilitation robot scheme is proposed. Firstly
starting from the common rehabilitation actions of patients with cervical spondylosis
a new type of spherical coupled mechanism is designed according to the physiological structure and kinematic mechanism of the human neck
aiming at better realizing the rehabilitation training of the head and neck of patients. The screw theory is used to analyze the degree of freedom of the mechanism
the kinematics and dynamics model of the robot is established
the solution formula and dynamic equation of the mechanism kinematics is obtained
and the movement space of the mechanism is obtained through Matlab simulation to verify that it meets the space requirements for rehabilitation training. The step function is written through the model action in Adams
and the curve obtained from the kinematics simulation is compared and analyzed with the theoretical calculation results. Finally
the transient dynamics analysis is performed on the key parts of the robot through Ansys Workbench
and the stress nephogram of the mechanism is obtained to verify the rationality of its structural design
which lays the foundation for prototype construction and control strategy research.
颈椎康复球面耦合机器人运动学仿真瞬态动力学
Cervical spine rehabilitationSpherical coupled robotKinematics simulationTransient dynamics
赵忠民.颈型颈椎病的症状与软组织的变化研究[D].北京:中国中医科学院,2011:1-3.
ZHAO Zhongmin.Research on symptoms signs and soft tissue changes of neck type of cervical spondylosis[D].Beijing:China Academy of Chinese Medical Sciences,2011:1-3.
QASSIM M Q,WAN H W Z.A review on upper limb rehabilitation robots[J].Applied Sciences,2020,10(19):6976.
李光林,郑悦,吴新宇,等.医疗康复机器人研究进展及趋势[J].中国科学院院刊,2015,30(6):793-802.
LI Guanglin,ZHENG Yue,WU Xinyu,et al.State of the art of medical and rehabilitation robotics and their perspective[J].Bulletin of Chinese Academy of Sciences,2015,30(6):793-802.
JACOBS H V.Detachable soft collar[J].Neurology,1961,32(2):717-721.
GLAZENER P.Pilot study to determine the effectiveness of a new neck brace design for patients with amyotrophic lateral sclerosis[J].Journal of Nursing Education and Practice,2014,4(6):17-21.
ZHANG H H,AGRAWAL S K.Kinematic design of a dynamic brace for measurement of head/neck motion[J].IEEE Robotics and Automation Letters,2017,2(3):1428-1435.
KIM J H,KIM J G,DO K S,et al.The effect of applying a head-weight device on cervical angle and pain of neck muscles[J].Physical Therapy Rehabilitation Science,2016,5(2):101-105.
孙远韬,郭晨睿,李云生,等.一种可穿戴智能颈部治疗装置开发研究[J].生物医学工程学进展,2017,38(2):66-68,74.
SUN Yuantao,GUO Chenrui,LI Yunsheng,et al.Research and development of a wearable intelligent neck treatment device[J].Progress in Biomedical Engineering,2017,38(2):66-68,74.
陈朝峰.基于球面并联机构的ALS颈椎外骨骼理论分析与设计[D].哈尔滨:哈尔滨工业大学,2016:18.
CHEN Chaofeng.The theoretical analysis and design of a cervical exoskeleton based on spherical parallel mechanism for patients with ALS[D].Harbin:Harbin Institute of Technology,2016:18.
WU D S,WANG L,LI P.A 6-DOF exoskeleton for head and neck motion assist with parallel manipulator and sEMG based control[C]//2016 International Conference on Control Decision and Information Technologies (CODIT). IEEE,2016:341-344.
吕慧,张锦明.多自由度控制牵引治疗神经根型颈椎病的临床研究[J].哈尔滨医科大学学报,2019,53(2):213-216.
LÜ Hui,ZHANG Jinming.Treatment of cervical spondylotic radiculopathy with multi-degree freedom control traction[J].Journal of Harbin Medical University,2019,53(2):213-216.
戚世家.基于并联机构的颈椎康复机器人设计[D].北京:北京交通大学,2021:63-65.
QI Shijia.Design of a parallel robot for head/neck rehabilitation[D].Beijing:Beijing Jiaotong University,2021:63-65.
HUANG Z,LI Q C.General methodology for type synthesis of symmetrical lower-mobility parallel manipulators and several novel manipulators[J].The International Journal of Robotics Research,2002,21(2):131-145.
REINKENSMEYER D J,KAHN L E,AVERBUCH M,et al.Understanding and treating arm movement impairment after chronic brain injury:progress with the ARM guide[J].Journal of Rehabilitation Research and Development,2000,37(6):653-662.
吕荣丰,姜芹.人体工程学[M].重庆:重庆大学出版社,2014:18-20.
LÜ Rongfeng,JIANG Qin.Ergonomics[M].Chongqing:Chongqing University Press,2014:18-20.
KRISHNAN V L,PATHAK P M,JAIN S C.Force control in monopod hopping robot while landing[J].Intelligent Control and Automation,2010,1(2):96-104.
余俊炜,许洪斌,徐涛金,等.一种绳牵引上肢康复机器人结构设计与有限元分析[J].机械传动,2018,42(12):93-97.
YU Junwei,XU Hongbin,XU Taojin,et al.Structure design and finite element analysis of a rope traction upper limb rehabilitation robot[J].Journal of Mechanical Transmission,2018,42(12):93-97.
0
浏览量
0
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构