装配误差和齿面修形对曲线圆柱齿轮传动误差的影响
Influence of Assembly Errors and Tooth Surface Modification on Transmission Errors of Curvilinear Cylindrical Gears
- 机械传动 2022年46卷第10期 页码：86-92
- 作者机构：
1.攀枝花学院 智能制造学院， 四川 攀枝花 617000
- 作者简介：
张学刚（1986— ），男，重庆永川人，博士研究生，讲师；主要从事齿轮传动方面的研究。
- 基金信息：攀枝花市指导性科技计划项目(2021ZD-G-1┫攀枝花学院培育项目┣2020ZD008)
DOI：10.16578/j.issn.1004.2539.2022.10.013
中图分类号：
扫 描 看 全 文
张学刚,谢永春,王鹏飞.装配误差和齿面修形对曲线圆柱齿轮传动误差的影响[J].机械传动,2022,46(10):86-92.
Zhang Xuegang,Xie Yongchun,Wang Pengfei.Influence of Assembly Errors and Tooth Surface Modification on Transmission Errors of Curvilinear Cylindrical Gears[J].Journal of Mechanical Transmission,2022,46(10):86-92.
张学刚,谢永春,王鹏飞.装配误差和齿面修形对曲线圆柱齿轮传动误差的影响[J].机械传动,2022,46(10):86-92. DOI： 10.16578/j.issn.1004.2539.2022.10.013.
Zhang Xuegang,Xie Yongchun,Wang Pengfei.Influence of Assembly Errors and Tooth Surface Modification on Transmission Errors of Curvilinear Cylindrical Gears[J].Journal of Mechanical Transmission,2022,46(10):86-92. DOI： 10.16578/j.issn.1004.2539.2022.10.013.
摘要
基于齿轮啮合理论，推导了带抛物线修形的曲线圆柱齿轮齿面方程，研究了齿轮副有限元模型初始接触位置的求解方法；利用齿轮参数化有限元技术，建立了齿轮副的有限元模型，从有限元分析结果中提取了齿轮载荷传动误差；通过20余组算例分别研究了齿轮副的装配误差、修形量、刀盘曲率半径和修形曲线偏置量对载荷传动误差的影响。结果表明，装配误差可以降低载荷传动误差的波动幅度；较大的齿面修形量可减小载荷传动误差波动幅度；较大的刀盘曲率半径可减小载荷传动误差值和误差波动幅度；齿面修形曲线的偏置对载荷传动误差的影响较小。总的来说，采用较大曲率半径的修形刀盘可加工出传动性能更好的曲线圆柱齿轮。
Abstract
Tooth surface equations of a curvilinear cylindrical gear with parabolic modification are derived based on the gear meshing theory. The solving method of the initial contact position of the gear finite element model is studied, a finite element model of the gear pair is established using the parameterized finite element technology, and the loaded transmission error is extracted from the finite element analysis results. With more than 20 sets of calculation examples, the effects of assembly errors, modification amount, curvature radius of the cutter, and offset of modification curve on loaded transmission errors are studied, respectively. The research results show that, assembly errors can reduce the fluctuation range of loaded transmission errors; larger modification amount can reduce the fluctuation range of loaded transmission errors; larger curvature radius of the cutter can reduce the value of loaded transmission errors and its fluctuation range; the offset of the modification curve has slight effect on loaded transmission errors. In summary, the use of a larger curvature radius of the cutter can be used to machine curvilinear cylindrical gears with better transmission performance.
关键词
曲线圆柱齿轮装配误差齿面修形载荷传动误差有限元法数学模型
Keywords
Curvilinear cylindrical gearAssembly errorTooth surface modificationLoaded transmission errorFinite element methodMathematical model
references
ZHANG X，LIANG Z.Mathematical model and contact characteristics of curvilinear cylindrical gears with line contact［J］.Journal of the Brazilian Society of Mechanical Sciences and Engineering，2021，43（4）：1-18.
张学刚，梁政.弧齿圆柱齿轮研究现状综述［J］.机械传动，2020，44（7）：140-150.
ZHANG Xuegang，LIANG Zheng.Review on rearch status of curvilinear cylindrical gear［J］.Journal of Mechanical Transmission，2020，44（7）：140-150.
ARAFA H A.C-gears：geometry and machining［J］.Proceedings of the Institution of Mechanical Engineers，Part C：Journal of Mechanical Engineering Science，2005，219（7）：709-726.
ARAFA H A，BEDEWY M.C-gears in rotorcraft transmissions：a novel design paradigm［C］.Presented at Intenational Powered Lift Conference，October 5-7，2010，Philadelphia，PA.，2010：1-8.
LIU S.Curvilinear cylindrical gears［J］.Gear Technology，1988，5（3）：8-12.
TSENG R，TSAY C.Mathematical model and undercutting of cylindrical gears with curvilinear shaped teeth［J］.Mechanism and Machine Theory，2001，36（11）：1189-1202.
TSENG R，TSAY C.Contact characteristics of cylindrical gears with curvilinear shaped teeth［J］.Mechanism and Machine Theory，2004，39（9）：905-919.
TSENG J，TSAY C.Mathematical model and surface Deviation of cylindrical gears with curvilinear shaped teeth cut by a hob cutter［J］.Journal of Mechanical Design，2005，127（5）：982-987.
TSENG J，TSAY C.Undercutting and contact characteristics of cylindrical gears with curvilinear shaped teeth generated by hobbing［J］.Journal of Mechanical Design，2006，128（3）：634-643.
WU Y，CHEN K，TSAY C，et al.Contact characteristics of circular-arc curvilinear tooth gear drives［J］.Journal of Mechanical Design，2009，131（8）：81003.
CHEN Y，GU M.Tooth contact analysis of a curvilinear gear set with modified pinion tooth geometry［J］.Proceedings of the Institution of Mechanical Engineers，Part C：Journal of Mechanical Engineering Science，2011，225（4）：975-986.
CHEN Y，LO C.Contact stress and transmission errors under load of a modified curvilinear gear set based on finite element analysis［J］.Proceedings of the Institution of Mechanical Engineers Part C：Journal of Mechanical Engineering Science，2015，229（2）：191-204.
苏进展，方宗德，曹雪梅.成形法加工的弧线齿面齿轮几何接触分析［J］.航空动力学报，2010，25（6）：1427-1431.
SU Jinzhan，FANG Zongde，CAO Xuemei.Tooth contact analysis of face gear drive with curvilinear shaped tooth by format cutting［J］.Journal of Aerospace Power，2010，25（6）：1427-1431.
牛艳萍，苏进展.抛物形齿线圆柱齿轮啮合特性研究［J］.机械设计，2010，27（6）：27-31.
NIU Yanping，SU Jinzhan.Study on meshing characteristics of cylindrical gears with parabolic tooth traces［J］.Journal of Machine Design，2010，27（6）：27-31.
苏进展，方宗德.弧线齿圆柱齿轮四阶传动误差设计与分析［J］.机械传动，2014，38（9）：11-14.
SU Jinzhan，FANG Zongde.Design and analysis of fourth order transmission error of circular-arc curvilinear of cylindrical gear［J］.Journal of Mechanical Transmission，2014，38（9）：11-14.
FUENTES A，RUIZ-ORZAEZ R，GONZALEZ-PEREZ I.Computerized design，simulation of meshing，and finite element analysis of two types of geometry of curvilinear cylindrical gears［J］.Computer Methods in Applied Mechanics and Engineering，2014，272：321-339.
马登秋，侯力，魏永峭，等.基于分形理论的圆弧齿轮滑动摩擦接触力学模型［J］.机械工程学报，2016，52（15）：121-127.
MA Dengqiu，HOU Li，WEI Yongqiao，et al.Sliding friction contact mechanics model of the involute arc cylindrical gear based on fractal theory［J］.Journal of Mechanical Engineering，2016，52（15）：121-127.
SUN Z J，HOU L，WANG J G，et al.Contact strength analysis of circular-arc-tooth-trace cylindrical gear［J］.Journal of The Brazilian Society of Mechanical Sciences and Engineering，2016，38（3）：999-1005.
陈忠敏，侯力，段阳，等.变双曲圆弧齿线圆柱齿轮非线性振动特性分析［J］.工程科学与技术，2017，49（2）：209-216.
CHEN Zhongmin，HOU Li，DUAN Yang，et al.Analysis of nonlinear vibration on a cylindrical gear with variational hyperbola and circular-arc-tooth-trace［J］.Advanced Engineering Sciences，2017，49（2）：209-216.
魏永峭，马登秋，吴阳，等.变双曲圆弧齿线圆柱齿轮齿面曲率特性研究［J］.工程科学与技术，2017，49（6）：196-203.
WEI Yongqiao，MA Dengqiu，WU Yang，et al.Study on the tooth surface and curvature characteristics of cylindrical gear with variable hyperbolic arc-tooth-trace［J］.Advanced Engineering Sciences，2017，49（6）：196-203.
罗岚，侯力，赵斐，等.变双曲圆弧齿线圆柱齿轮传动几何特性分析［J］.工程科学与技术，2018，50（1）：171-179.
LUO Lan，HOU Li，ZHAO Fei，et al.Analysis on geometric characteristics of cylindrical gear with variable hyperbolic circular-arc-tooth-trace［J］.Advanced Engineering Sciences，2018，50（1）：171-179.
WEI Y，LIU Y，MA D，et al.Research on thermal elastohydrodynamic lubrication of cylindrical gears with curvilinear shaped teeth［J］.Journal of The Chinese Society of Mechanical Engineers，2018，39（5）：451-458.
LITVIN F L，FUENTES A.Gear geometry and applied theory［M］.2th ed.Cambridge：Cambridge University Press，2004：818.
HUANG K J，SU H W.Approaches to parametric element constructions and dynamic analyses of spur/helical gears including modifications and undercutting［J］.Finite Elements in Analysis and Design，2010，46（12）：1106-1113.
GONZALEZ-PEREZ I，FUENTES-AZNAR A.Implementation of a finite element model for stress analysis of gear drives based on multi-point constraints［J］.Mechanism and Machine Theory，2017，117：35-47.
0
浏览量
3
下载量
0
CSCD
- 网络PDF下载
- Meta-XML下载
- BibTeX下载
- Endnote下载
- RefMan 下载
- NoteExpress下载
- NoteFirst下载
关联资源
相关文章
相关作者
相关机构
- 技术支持由北京北大方正电子有限公司提供 豫ICP备05013835号-5
京公网安备11010802024621 - 本系统建议在Chrome、 IE9+ 以上版本浏览器阅读本站内容，360浏览器请切换至极速模式
- Cookies帮助我们提供服务并提供个性化体验。使用本网站，即表示您同意我们使用Cookies