1.常州工业职业技术学院 智能控制学院, 江苏 常州 213164
2.中国科学技术大学 工程科学学院, 安徽 合肥 230026
3.河海大学 机电工程学院, 江苏 常州 213022
沈建明(1968— ),男,江苏常州人,副教授;研究方向为数控机床、机电一体化技术。
扫 描 看 全 文
沈建明,刘进福,李娟等.基于嵌套结构的无级变速器设计与分析[J].机械传动,2022,46(03):50-55.
Shen Jianming,Liu Jinfu,Li Juan,et al.Design and Analysis of Continuously Variable Transmission based on Nested Structure[J].Journal of Mechanical Transmission,2022,46(03):50-55.
沈建明,刘进福,李娟等.基于嵌套结构的无级变速器设计与分析[J].机械传动,2022,46(03):50-55. DOI: 10.16578/j.issn.1004.2539.2022.03.008.
Shen Jianming,Liu Jinfu,Li Juan,et al.Design and Analysis of Continuously Variable Transmission based on Nested Structure[J].Journal of Mechanical Transmission,2022,46(03):50-55. DOI: 10.16578/j.issn.1004.2539.2022.03.008.
目前,机器人关节减速机均为定比传动方式,造成关节电机难以达到峰值效率。基于嵌套结构,提出了一种机器人用紧凑型的无级变速器,通过实时改变传动比,可有效提高电机功率使用效率。首先,开展了变速传动机理研究,得到了传动比相对于行星轮与太阳轮半径之比的关系;设计了嵌套结构以及行星轮、太阳轮板轴向移动系统。其次,推导了行星轮、太阳轮包角、传动比以及金属带径向移动数学模型,基于多刚体动力学仿真软件对变速器的输出速度进行了仿真验证;结果表明,变速器正、反向偏差分别为1.89%、3.87%。最后,制作出变速器的原理样机并搭建转矩实验平台,设定输出转矩为特定值,测试了对应输入转矩;实验显示,测试数值与理论数值相比基本相同,平均传动效率为72.1%,间接验证了理论推导的正确性。
At present,robot joint reducers are all constant transmission ratio,which makes it difficult for the motor to reach peak efficiency. Based on the nested structure,a compact continuously variable transmission (CVT) for robots is proposed,which can effectively increase the power usage of the motor by changing the transmission ratio in real time. Firstly,the mechanism of variable speed transmission is studied to obtain the relationship between transmission ratio and the ratio of planetary gear to sun gear radius,and the nested structure and the axial movement system of planetary gear and sun gear plate are designed. Secondly,the mathematical models of envelope angle on planetary and sun gear,transmission ratio,and radial movement of metal belt are deduced. Based on the multi-rigid-body dynamics simulation software,the output speed of the CVT is verified to show that the forward and reverse deviations of the transmission are 1.89% and 3.87% respectively. Finally,the principle prototype of the CVT is manufactured and the torque experiment platform is built,and the output torque is set to a specific value to test the corresponding input torque. The experiment shows that the test value is basically the same as the theoretical value,and the average transmission efficiency is 72.1%,which indirectly verifies the correctness of the theoretical derivation.
无级变速器嵌套结构传动比行星轮太阳轮
CVTNested structureTransmission ratioPlanetary gearSun gear
孙冬野,秦大同,杨亚联.金属带式无级变速传动的运动学和动力学分析[J].重庆大学学报(自然科学版),1998(4):1-6.
Sun Dongye,Qin Datong,Yang Yalian,Analysis of kinematic and kinetic characteristics of a metal pushing V-Belt CVT[J].Journal of Chongqing University(Natural Science Edition),1998(4):1-6.
杨亚联.金属带无级自动变速传动的关键问题研究[D].重庆:重庆大学,2002:3-5.
YANG Yalian.Study on some key problems of metal-belt continuously variable transmission[D].Chongqing:Chongqing University,2002:3-5.
郏高祥.基于遗传算法的摆销链式CVT速比控制策略研究[D].西安:西安科技大学,2019:1-3.
JIA Gaoxiang.Research on control strategy of rocker-pin jointed CVT speed ratio based on genetic algorithm[D].Xi'an:Xi'an University of Science and Technology,2019:1-3.
李忠,秦大同.半环型锥盘滚轮式无级变速器的传动特性研究[J].中国机械工程,2005(6):22-26.
LI Zhong,QIN Datong.Transmission characteristics of half-toroidal traction drive continuously variable transmission[J].Chinese Mechanical Engineering,2005(6):22-26.
SRIVASTAVA N,HAQUE I.A review on belt and chain continuously variable transmissions(CVT):Dynamics and control[J].Mechanism & Machine Theory,2009,44(1):19-41.
吴光强,孙贤安.汽车无级变速器技术和应用的发展综述[J].同济大学学报(自然科学版),2009,37(12):1642-1647.
WU Guangqiang,SUN Xian'an.Development survey of automobile continuously variable transmission technique and application aspects[J].Journal of Tongji University(Natural Science),2009,37(12):1642-1647.
周有强,崔学良,董志峰.机械无级变速器发展概述[J].机械传动,2005,29(1):65-68.
ZHOU Youqiang,CUI Xueliang,DONG Zhifeng.Development of mechanical continuously variable transmission[J].Journal of Mechanical Transmission,2005,29(1):65-68.
KEMBAUM A S,KITCHELL M,CRITTENDEN M.An ultra-compact infinitely variable transmission for robotics[C]//Proceedings of the 2017 IEEE International Conference on Robotics and Automation,May 29-July 3,2017,Singapore.New York:IEEE,c2017:1800-1807.
FELTON S M,LEE D Y,CHO K J,et al.A passive,origami-inspired,continuously variable transmission[C]//Prceedings of the 2014 IEEE International Conference on Robotics and Automation,May 31-June 7,2014, Hong Kong,China.New York:IEEE,c2014:2913-2918.
KIM J,PARK F C,PARK Y.Design,analysis and control of a wheeled mobile robot with a nonholonomic spherical CVT[J].International Journal of Robotics Research,2002,21(5/6):409-426.
KIM J,YEOM H,PARK F C,et al.On the energy efficiency of CVT-based mobile robots[C]//Proceedings of the 2000 IEEE International Conference on Robotics and Automation,April 24-28,2000,San Francisco,USA.New York:IEEE,c2000:1539-1544.
MATSUSHITA K,SHIKANAI S,YOKOI H.Development of drum CVT for a wire-driven robot hand[C]//Proceedings of the 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems,October 10-15,2009,St.Louis,MO,USA.New York:IEEE,c2009:2251-2256.
DRESSCHER D,NAVES M,DE VRIES T J A,et al.Power split based dual hemispherical continuously variable transmission[J].Actuators,2017,21(2):1-20.
林若.面向小型移动机器人的无级变速器的研究[D].哈尔滨:哈尔滨工业大学,2013:9-18.
LIN Ruo.Research on CVT oriented to small mobile robots[D].Harbin :Harbin Institute of Technology,2013:9-18.
0
浏览量
3
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构