1.河南科技大学 机电工程学院, 河南 洛阳 471003
2.河南科技大学 机械装备先进制造河南省协同中心, 河南 洛阳 471003
张家铭(1997— ),男,河南内黄人,硕士;主要从事轴承动态特性及理论研究。
邱明(1969— ),女,江苏无锡人,博士,教授,博士生导师;主要从事轴承设计及理论研究。
扫 描 看 全 文
张家铭,邱明,庞晓旭等.基于正交试验的圆柱滚子轴承结构优化[J].机械传动,2022,46(03):31-38.
Zhang Jiaming,Qiu Ming,Pang Xiaoxu,et al.Structure Optimization of Cylindrical Roller Bearing based on Orthogonal Test[J].Journal of Mechanical Transmission,2022,46(03):31-38.
张家铭,邱明,庞晓旭等.基于正交试验的圆柱滚子轴承结构优化[J].机械传动,2022,46(03):31-38. DOI: 10.16578/j.issn.1004.2539.2022.03.005.
Zhang Jiaming,Qiu Ming,Pang Xiaoxu,et al.Structure Optimization of Cylindrical Roller Bearing based on Orthogonal Test[J].Journal of Mechanical Transmission,2022,46(03):31-38. DOI: 10.16578/j.issn.1004.2539.2022.03.005.
针对航发主轴轴承在高速轻载下存在的打滑问题,在构建某航发圆柱滚子轴承仿真模型的基础上,研究了滚子数、滚子长度、初始径向游隙、保持架引导间隙等结构参数对轴承打滑和疲劳寿命的影响规律。结果表明,增加滚子数和保持架引导间隙,减小滚子长度和初始径向游隙,可以有效降低轴承打滑率。采用正交设计方法,得到滚子数、滚子长度、初始径向游隙、保持架引导间隙对轴承打滑、轴承疲劳寿命、内滚道磨损率的影响权重。通过综合平衡优化,得到当滚子数、滚子长度、初始径向游隙、保持架引导间隙分别为13 mm、6 mm、-2 μm、1 mm时,保持架打滑率为0.29%,内滚道磨损率为5.9×10,-13, m,3,/s;在保证轴承寿命的同时,降低了轴承发生打滑蹭伤、磨损失效的概率。
In view of the skidding of aero-engine spindle bearings under high speed and light load and based on the construction of a simulation model of an aero-engine cylindrical roller bearing,the effects of structural parameters such as roller number,roller length,initial radial clearance and cage guide clearance on bearing skidding and fatigue life are studied . The results show that the rate of bearing skidding can be effectively reduced by increasing the number of rollers,cage guide clearance,and reducing roller length and initial radial clearance. By using the orthogonal design method,the influence weights of roller number,roller length,initial radial clearance and cage guide clearance on bearing skidding,bearing fatigue life and inner raceway wear rate are obtained. Through comprehensive balance and optimization,it is obtained that when the number of rollers,roller length,initial radial clearance and cage guide clearance are 13,6 mm,-2 μm and 1 mm respectively,the cage skidding rate is 0.29%,and the inner raceway wear rate is 5.9×10,-13, m,3,/s,which reduce the probability of skidding and abrasion failure of the bearings while ensuring the bearing life.
圆柱滚子轴承打滑极差分析结构参数
Cylindrical roller bearingSkiddingRange analysisStructural parameter
LI J N,CHEN W G.Effects of different structure parameters on skidding of high-speed roller bearing considering bearing whirling[J].Journal of Vibroengineering,2014,16(2):748-760.
SELVARAJ A,MARAPPAN R.Experimental analysis of factors influencing the cage slip in cylindrical roller bearing[J].International Journal of Advanced Manufacturing Technology,2011,53(5):635-644.
李军宁,陈渭,马志涛,等.大型滚动轴承承载特性与滑差演变规律研究[J].组合机床与自动化加工技术,2017(7):32-36.
LI Junning,CHEN Wei,MA Zhitao,et al.Research on load distribution and skidding mechanism of large rolling bearing[J].Combined Machine Tool and Automatic Machining Technology,2017(7):32-36.
曹伟,王家序,蒲伟,等.润滑剂的黏弹性与动压力对圆柱滚子轴承打滑的影响[J].中南大学学报(自然科学版),2018,49(2):345-352.
CAO Wei,WANG Jiaxu,PU Wei,et al.Effect of viscoelasticity of lubricant and hydrodynamic pressure force on skidding in cylindrical roller bearings[J].Journal of Central South University (Science and Technology),2018,49(2):345-352.
陈渭,李军宁,张立波,等.考虑涡动工况的高速滚动轴承打滑失效分析[J].机械工程学报,2013,49(6):39-43.
CHEN Wei,LI Junning,ZHANG Libo,et al.Skidding analysis of high speed rolling bearing considering whirling of bearing[J].Journal of Mechanical Engineering,2013,49(6):39-43.
公平,张静静,刘海波,等.圆柱滚子轴承保持架优化设计[J].轴承,2015(11):8-10.
GONG Ping,ZHANG Jingjing,LIU Haibo,et al.Optimal design of cage for cylindrical roller bearing[J].Bearing,2015(11):8-10.
毛宇泽,王黎钦,古乐.负游隙对高速高温薄壁圆柱滚子轴承动态性能的影响分析[J].航空动力学报,2016,31(11):2795-2800.
MAO Yuze,WANG Liqin,GU Le.Effect of negative clearance on dynamic characteristics of high-speed high-temperature thin-walled cylindrical roller bearings[J].Journal of Aerospace Power,2016,31(11):2795-2800.
张亚军,张雨奇.轴向载荷下圆柱滚子轴承滚子端面与挡边接触位置的多目标模糊优化设计[J].轴承,2017(3):5-8.
ZHANG Yajun,ZHANG Yuqi.Multi-objective fuzzy optimization design of contact position between roller end face and rib for cylindrical roller bearings under axial load[J].Bearing,2017(3):5-8.
杨凡,赵俊,张龙周.滚子轮廓修形对圆柱轴承接触应力及寿命的影响[J].机械工程师,2019(3):136-141.
YANG Fan,ZHAO Jun,ZHANG Longzhou.Effect of roller profile modification on contact stress and life of cylindrical bearings[J].Mechanical Engineer,2019(3):136-141.
张运瑞.高速陶瓷圆柱滚子轴承优化设计及其动态特性研究[D].洛阳:河南科技大学,2014:9-14.
ZHANG Yunrui.Research of dynamic characteristics and optimized design of high-speed ceramic cylindrical eoller bearing[D].Luoyang:Henan University of Science and Technology,2014:9-14.
邓四二,贾群义,薛进学.滚动轴承设计原理[M].2版.北京:中国标准出版社,2014:44-46.
DENG Sier,JIA Qunyi,XUE Jinxue.Design principle of rolling bearing[M].2nd ed.Beijing:Standards Press of China,2014:44-46.
焦育洁,吕新生,张锡昌.航空发动机主轴圆柱滚子轴承典型故障分析[J].轴承,2003(12):29-30.
JIAO Yujie,LÜ Xinsheng,ZHANG Xichang.Typical fault analysis of cylindrical roller bearing of aeroengine spindle[J].Bearing,2003(12):29-30.
0
浏览量
3
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构