1.重庆理工大学 汽车零部件先进制造技术教育部重点实验室, 重庆 400054
郭栋(1983— ),男,山西大同人,博士,副教授,硕士研究生导师;主要研究方向为汽车传动系统NVH技术、新型高性能传动技术。
扫 描 看 全 文
郭栋,罗冬源,陈芳超.基于MPS方法的齿轮箱内部型腔结构搅油损失仿真分析[J].机械传动,2022,46(03):24-30.
Guo Dong,Luo Dongyuan,Chen Fangchao.Simulation Analysis of Churning Loss of Internal Cavity Structure of Gearbox based on MPS Method[J].Journal of Mechanical Transmission,2022,46(03):24-30.
郭栋,罗冬源,陈芳超.基于MPS方法的齿轮箱内部型腔结构搅油损失仿真分析[J].机械传动,2022,46(03):24-30. DOI: 10.16578/j.issn.1004.2539.2022.03.004.
Guo Dong,Luo Dongyuan,Chen Fangchao.Simulation Analysis of Churning Loss of Internal Cavity Structure of Gearbox based on MPS Method[J].Journal of Mechanical Transmission,2022,46(03):24-30. DOI: 10.16578/j.issn.1004.2539.2022.03.004.
为探究内部型腔结构对搅油损失的影响规律,提升汽车传动系统效率,以齿轮箱为研究对象,运用移动粒子半隐式法建立了齿轮箱搅油损失数值仿真模型;通过数值仿真结果并结合润滑油分布情况分析了不同轴向间隙、径向间隙、挡油板、集油槽和内部型腔对搅油损失的影响规律。分析结果表明,搅油损失与轴向间隙呈非线性正相关关系,但当轴向间隙到达一定数值后,对搅油损失的影响较小;与径向间隙呈非线性负相关关系,且随着径向间隙的增加,其下降的趋势变小;挡油板和集油槽结构能降低搅油损失,且随着其长度的增加,效果更加显著;流线型型腔与圆弧状型腔会在一定程度上增大搅油损失。
In order to explore the influence of the internal cavity structure on the churning loss and to improve the efficiency of the automobile transmission system,the gearbox is used as the research object,and a numerical simulation model of the gearbox churning loss is established by using the moving particle semi-implicit method. Through the numerical simulation results and combined with the distribution of lubricants,the influence of different axial clearances,radial clearances,oil baffle plates,oil collection grooves and internal cavities on the churning loss is analyzed. The analysis results show that the churning loss has a non-linear positive correlation with the axial clearance,but when the axial clearance reaches a certain value,it has almost no effect on the churning loss; it has a nonlinear negative correlation with the radial clearance,and as the radial clearance increases,its downward trend becomes smaller; the oil baffle and oil collecting groove structure can reduce the churning loss,and with the increase of its length,the effect becomes more significant; the streamlined cavity and the arc-shaped cavity increase the churning loss to a certain extent.
搅油损失型腔结构移动粒子半隐式法流场分布
Churning lossCavity structureMPSFlow field distribution
常德功,秦臻,邵晨.电动汽车轮边驱动系统齿轮箱效率分析[J].机电工程,2015,32(1):47-51.
CHANG Degong,QIN Zhen,SHAO Chen.Efficiency analysis on the gearbox of the electric vehicles in-wheel drive system[J].Journal of Mechanical & Electrical Engineering,2015,32(1):47-51.
CONCLI F,GORLA C.Computational and experimental analysis of the churning power losses in an industrial planetary speed reducer[J].WIT Transactions on Engineering Science,2012,74:287-298.
CONCLI F,GORLA C.Influence of lubricant temperature,lubricant level and rotational speed on the churning power loss in an industrial planetary speed reducer:computational and experimental study[J].International Journal of Computional Methods and Experimental Measurements,2013,1(4):353-366.
LIU H,JURKSCHAT T,LOHNER T,et al.Determination of oil distribution and churning power loss of gearboxes by finite volume CFD method[J].Tribology International,2017,109:346-354.
梁文宏,刘凯,崔亚辉.基于有限元分析的斜齿轮搅油功率损失测算及实验验证[J].中国机械工程,2014,25(18):2510-2515.
LIANG Wenhong,LIU Kai,CUI Yahui.Calculation and experimental verification of helical gear churning power loss based on finite element analysis[J].China Mechanical Engineering,2014,25(18):2510-2515.
沈林,阮登芳,涂攀.基于CFD方法的啮合齿轮搅油损失仿真分析[J].机械传动,2018,42(11):113-116.
SHEN Lin,RUAN Dengfang,TU Pan.Simulation analysis of meshing gear churning power loss based on CFD method[J].Journal of Mechanical Transmission,2018,42(11):113-116.
GAO W J,NELIAS D,BOISSON N,et al.Model formulation of chu-rning losses in cylindrical roller bearings based on numerical simulation[J].Tribology International,2018,121:420-434.
李晏,皮彪,王叶枫,等.基于移动粒子半隐式法的齿轮搅油损失分析与试验验证[J].同济大学学报(自然科学版),2018,46(3):368-372.
LI Yan,PI Biao,WANG Yefeng,et al.Analysis and verification of churning loss of helical gear based on moving particle semi-implicit method[J].Journal of Tongji Universal:Natural Science,2018,46(3):368-372.
JI Z,STANIC M,HARTONO E A,et al.Numerical simulations of oil flow inside a gearbox by smoothed particle hydrodynamics (SPH) method[J].Tribology International,2018,127:47-58.
GUO D,CHEN F C,LIU J,et al.Numerical modeling of churning power loss of gear system based on moving particle method[J].Tribology Transactions,2020,63(1):182-193.
CHANGENET C,VELEX P.Housing influence on churning losses in geared transmissions[J].Journal of Mechanical Design,2008,130(6):681-688.
陈晟伟,姜淑忠.一种角度可变型齿轮箱搅油损失试验机的设计及测试[J].润滑与密封,2015,40(9):93-98.
CHEN Shengwei,JIANG Shuzhong.Design and test of a gear box churning torque loss tester with changeable inclination angle[J].Lubrication Engineering,2015,40(9):93-98.
KOSHIZUKA S,OKA Y.Moving particle semi-implicit method for fragmentation of incompressible fluid[J].Nuclear Science and Engineering:The Journal of the American Nuclear Society,1996,123:421-434.
HUTTER C,WANG Y Q.Turbulent mixing length models and their applications to elementary flow configurations[J].Advanced Fluid Mechanics and Thermodynamic Fundamentals,2016,7(12):263-316.
LIU H,ARFAOUI G,STANIC M,et al.Numerical modelling of oil distribution and churning gear power losses of gearboxes by smoothed particle hydrodynamics[J].Journal of Engineering Tribology,2018,233(1):74-86.
郭永怀.边界层理论讲义[M].合肥:中国科学技术大学出版社,2008:53-54.
GUO Yonghuai.Lecture notes on boundary layer theory[M].Hefei:University of Science and Technology of China Press,2008:53-54.
郭栋,陈芳超,刘骄,等.齿轮副高速搅油阻力矩理论计算与试验研究[J].机械工程学报,2021,57(1):49-60.
GUO Dong,CHEN Fangchao ,LIU Jiao,et al.Theoretical and experimental study of oil churning resistance torque of high-speed gear pair[J].Journal of Mechanical Engineering,2021,57(1):49-60.
0
浏览量
3
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构