1.合肥工业大学 汽车工程技术研究院, 安徽 合肥 230009
王翔(1995— ),男,安徽滁州人,硕士研究生,研究方向为汽车性能传动。
朱波(1980— ),男,湖北宜昌人,副研究员,研究方向为新能源汽车整车控制系统、混合动力系统开发与控制、多挡纯电驱动系统开发与控制及大数据分析应用。
扫 描 看 全 文
王翔,朱波,姚明尧等.基于移动粒子半隐式法(MPS)电动汽车减速器最佳润滑油量分析[J].机械传动,2020,44(11):112-120.
Wang Xiang,Zhu Bo,Yao Mingyao,et al.Analysis of Optimum Lubricant Quantity of Electric Vehicle Reducer based on Moving Particle Semi-implicit Method (MPS)[J].Journal of Mechanical Transmission,2020,44(11):112-120.
王翔,朱波,姚明尧等.基于移动粒子半隐式法(MPS)电动汽车减速器最佳润滑油量分析[J].机械传动,2020,44(11):112-120. DOI: 10.16578/j.issn.1004.2539.2020.11.019.
Wang Xiang,Zhu Bo,Yao Mingyao,et al.Analysis of Optimum Lubricant Quantity of Electric Vehicle Reducer based on Moving Particle Semi-implicit Method (MPS)[J].Journal of Mechanical Transmission,2020,44(11):112-120. DOI: 10.16578/j.issn.1004.2539.2020.11.019.
在分析某电动汽车减速器内元件的产热与传热过程的基础上,建立了基于AMEsim软件某电动汽车减速器热网络仿真模型,假设在充分润滑情况下,完成了高温高负荷不同车速工况条件下的减速器热平衡仿真。应用移动粒子半隐式法(MPS)分析了不同润滑油油量时减速箱的搅油流场,在此基础上,对减速器热网络模型中的对流换热热阻模块进行修正,分析得出减速器最佳润滑油油量。修正结果表明,电动汽车减速器在高温高负荷工况下,较少的润滑油油量会导致减速器齿轮系处于欠润滑状态,致使齿面温度较高。将热网络法与移动粒子半隐式法(MPS)相结合,为电动汽车减速器润滑效果分析提供了一种新方法。
Based on the analysis of the heat generation and heat transfer process of the internal components of an electric vehicle reducer, a thermal network simulation model of an electric vehicle reducer based on AMEsim software is established. It is assumed that under high lubricating conditions, the simulation of heat balance of the reducer under different condition of high-temperature and high-load different vehicle speed is completed. Then the moving particle semi-implicit method (MPS) is used to analyze the agitation flow field of the reduction gearbox at different lubricating oil quantity. Based on this, the convective heat transfer thermal resistance module of the thermal network model of the reducer is modified to obtain optimum oil quantity for reducer. The modified results indicate that under high-temperature and high-load conditions of electric vehicle reducers,a smaller amount of lubricating oil will cause the gears of reducer to be under-lubricated, resulting in higher tooth surface temperatures. Combining the thermal network model with the moving particle semi-implicit method (MPS) provides a new method for the lubrication effect analysis of electric vehicle reducers.
电动汽车减速器热平衡移动粒子半隐式法
Electric vehicleReducerThermal balanceMoving particle semi-implicit method
陈磊.基于ANSYS的行星减速器温度场分析[D].南京:南京航空航天大学,2009:20-28.
CHEN Lei.The temperature analysis of planet gear reducer based on ANSYS[D].Nanjing:Nanjing University of Aeronautics and Astronautics the Graduate School,2009:20-28.
葛世祥,刘之镭,吴鲁纪,等.高速齿轮箱稳态热分析综述[J].机械传动,2016,40(6):187-192.
GE Shixiang,LIU Zhilei,WU Luji,et al.Overview on steady state thermal analysis of high speed gearbox[J].Journal of Mechanical Transmission,2016,40(6):187-192.
鲍和云,范永,朱如鹏,等.齿轮箱浸油润滑流场及温度场仿真分析[J].中南大学学报(自然科学版),2019(8):1840-1847.
BAO Heyun,FAN Yong,ZHU Rupeng,et al.Simulation analysis of flow field and temperature field of oil-immersion lubrication gearbox[J].Journal of Central South University (Science and Technology),2019(8):1840-1847.
方世杰.齿轮传动设计中的最小油膜厚度与润滑[J].煤矿机械,2001(10):31-32.
FANG Shijie.The minimum thickness of the oil film and lubricate in the gear transmission design[J].Coal Mine Machinery,2001(10):31-32.
王冰.纯电动汽车两挡自动变速器效率和热平衡仿真分析[D].重庆:重庆大学,2017:40-45.
WANG Bing.Efficiency and thermal analysis of the two-speed AMT for pure electric vehicle[D].Chongqing:Chongqing University,2017:40-45.
张启胤,连晋毅,史富增,等.基于热网络法的传动系统稳态热平衡分析[J].建筑机械化,2012,33(3):65-67.
ZHANG Qiyin,LIAN Jinyi,SHI Fuzeng,et al.Steady heat balance analysis of transmission system based on thermal network method[J].Design & Research,2012,33(3):65-67.
李斌,庞鸿飞,李雪红,等.基于ANSYS的参数化齿轮温度场耦合分析[J].矿山机械,2015,43(8):134-138.
LI Bin,PANG Hongfei,LI Xuehong,et al.Coupling analysis of temperature field of parametric gear based on ANSYS[J].Mining-machine,2015,43(8):134-138.
沈林,阮登芳,涂攀.基于CFD方法的啮合齿轮搅油损失仿真分析[J].机械传动,2018,42(11):113-116.
SHEN Lin,RUAN Dengfang,TU Pan.Simulation analysis of meshing gear churning power loss based on CFD method[J].Journal of Mechanical Transmission,2018,42(11):113-116.
CHANGENET C,VELEX P.A model for the prediction of churning losses in geared transmissions-preliminary results[J].Journal of Mechanical Design,2007,129:128-133.
ANDERSON N E,LOEWENTHAL S H.Efficiency of nonstandard and high contact ratio involutes spur gears[J].Journal of Mechanical Design,1986,108:119.
PALMGREN A.Ball and roller bearing engineering[M].Philadelphia:SKF Industries,1946:18-23.
向超.基于热网络法的电动车高速差减齿轮箱热平衡分析[D].重庆:重庆大学,2019:32-43.
XIANG Chao.Thermal balance analysis of high speed gearbox of electric vehicle based on thermal network structure[D].Chongqing:Chongqing University,2019:32-43.
申朕,阮登芳,刘波.重型汽车变速器润滑系统流动与传热仿真分析[J].机械科学与技术,2015,34(7):107-110.
SHEN Zhen,RUAN Dengfang,LIU Bo.Simulating flow and heat transfer in lubrication system of a heavy-duty automobile transmission[J].Mechanical Science and Technology for Aerospace Engineering,2015,34(7):107-110.
阮登芳,刘波,陈志约,等.重型汽车变速器润滑系统热平衡仿真与实验[J].中国机械工程,2011,22(10):1142-1146.
RUAN Dengfang,LIU Bo,CHEN Zhiyue,et al.Simulation and experiment on heat balance process in lubrication system of a heavy-duty automobile transmission[J].China Mechanical Engineering,2011,22(10):1142-1146.
CHANGENET C,OVIEDO-MARIOT X,VELEX P .Power loss predictions in geared transmissions using thermal networks-applications to a six-speed manual gearbox[J].Journal of Mechanical Design,2006,128(3):618-625.
ANDERSON N E,LOEWENTHAL S H.Effect of geometry and operating conditions on spur gear system power loss[J].Journal of Mechanical Design,1981,103(1):151.
丁小军,王佐.法中公路设计标准、规范的差异比较[J].公路,2008(9):7-15.
DING Xiaojun,WANG Zuo.Comparison of differences in highway design standards and codes between France and China[J].Highway,2008(9):7-15.
皮彪,丁上,王叶枫,等.基于MPS的某重型汽车主减速器润滑系统优化与分析[J].润滑与密封,2018,43(1):98-103.
PI Biao,Ding Shang,Wang Yefeng,et al.Optimization and analysis of main reducer lubrication for heavy vehicle[J].Lubrication Engineering,2018,43(1):98-103.
WURM J,FITL M,GUMPESBERGER M,et al.Novel CFD approach for the thermal analysis of a continuous variable transmission (CVT)[J].Applied Thermal Engineering:Design,2016,103:159-169.
0
浏览量
6
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构