1.河北工程大学 机械与装备工程学院, 河北 邯郸 056000
黄凯(1993— ),男,安徽宿州人,硕士研究生,主要从事并联机构及机器人技术研究。
王磊磊(1979— ),男,河南漯河人,副教授,硕士生导师,主要从事机器人技术、叶轮机械增压技术等研究。
扫 描 看 全 文
黄凯,郭菲,王磊磊等.Delta型3D打印机多能域系统动力学全解建模与实验[J].机械传动,2020,44(03):118-123.
Huang Kai,Guo Fei,Wang Leilei,et al.Multi-energy Domain Dynamics Full Solution Modeling and Experiment of Delta 3D Printer[J].Journal of Mechanical Transmission,2020,44(03):118-123.
黄凯,郭菲,王磊磊等.Delta型3D打印机多能域系统动力学全解建模与实验[J].机械传动,2020,44(03):118-123. DOI: 10.16578/j.issn.1004.2539.2020.03.019.
Huang Kai,Guo Fei,Wang Leilei,et al.Multi-energy Domain Dynamics Full Solution Modeling and Experiment of Delta 3D Printer[J].Journal of Mechanical Transmission,2020,44(03):118-123. DOI: 10.16578/j.issn.1004.2539.2020.03.019.
对Delta型3D打印机多能域机、电耦合系统展开了动力学建模研究。利用旋量键合图在并联机器人动力学建模上的优势,构建了该打印机机械本体子系统的动力学模型,并结合传统键合图建立驱动子系统的动力学模型,获得打印机系统机、电耦合的全局动力学模型。对于给定的动平台运动轨迹,对比Adams数值仿真、Matlab理论计算以及实验实测驱动力结果,证明了该机构多能域系统动力学全解模型的正确性。该成果为后续动力学参数辨识以及动力学控制研究奠定基础,也为其他机械系统动力学建模提供了新思路。
This research focuses on the dynamic modeling of Delta 3D printer multi-energy domain mechanical-electrical coupling system. Based on the advantages of screw bond graph in the dynamic modeling of parallel robot,the dynamic model of the printer's mechanical ontology subsystem is constructed,and the dynamic model of the driving subsystem is established by combining with the traditional bond graph,and the global dynamic model of the printer's mechanical-electrical coupling is obtained. For a given moving platform trajectory,comparing the results of Adams numerical simulation,Matlab theoretical calculation and experimental driving force measurement show that the full solution model of multi-energy domain system dynamics of the mechanism is correct. The results lay a foundation for the following dynamic parameter identification and dynamic control research,and also provide a new idea for other mechanical system dynamics modeling.
3D打印动力学建模旋量键合图多能域
3D printingDynamics modelingScrew bond graphMulti-energy domain
陈文凯,莫亚武.三自由度并联机器人动力学及仿真[J].机械传动,2009,33(1):25-27.
CHEN Wenkai,MO Yawu.Dynamics and simulation of 3-DOF parallel robot[J].Journal of Mechanical Transmission,2009,33(1):25-27.
陈修龙,王成硕.基于牛顿-欧拉法的4-UPS-RPS机构刚体动力学分析[J].计算机集成制造系统,2014,20(7):1709-1715.
CHEN Xiulong,WANG Chengshuo.Rigid body dynamics analysis of 4-UPS-RPS mechanism based on newton-euler method[J].Computer Integrated Manufacturing Systems,2014,20(7):1709-1715.
SINGH R P,VANDERVOORT R J,LINKS P W.Dynamics of flexible bodies in tree-topology a computer-oriented approach[J].Journal of Guidance Control and Dynamics,1985,8(5):584-590.
李兵,王知行,李建生.基于凯恩方程的新型并联机床动力学研究[J].机械科学与技术,1999,18(1):41-43.
LI Bing,WANG Zhixing,LI Jiansheng.Study of new type parallel machine tool dynamics based on Kane equation[J].Mechanical Science and Technology,1999,18(1):41-43.
李新友,陈五一,韩先国.基于Kane方程的3UPS/S并联机构动力学研究[J].机床与液压,2011,39(13):1-5.
LI Xinyou,CHEN Wuyi,HAN Xianguo.Dynamics analysis of a 3UPS/S parallel mechanism based on kane equations[J].Machine Tool & Hydraulics,2011,39(13):1-5.
赵学洋,赵恒华,杨世彬,等.基于Kane方程的3-TPT并联机构动力学研究[J].机械传动,2016,40(1):36-39.
ZHAO Xueyang,ZHAO Henghua,YANG Shibin,et al.Dynamic research of 3-TPT parallel mechanism based on kane equation[J].Journal of Mechanical Transmission,2016,40(1):36-39.
刘善增,余跃庆,佀国宁,等.3自由度并联机器人的运动学与动力学分析[J].机械工程学报,2009,45(8):11-17.
LIU Shanzeng,YU Yueqing,SI Guoning,et al.Kinematic and dynamic analysis of a three-degree-of-freedom parallel manipulator[J].Journal of Mechanical Engineering,2009,45(8):11-17.
贾晓辉,刘今越,田延岭.空间全柔性并联机构动力学分析[J].农业机械学报,2012,43(8):210-214.
JIA Xiaohui,LIU Jinyue,TIAN Yanling.Dynamic analysis of spatial fully flexible parallel mechanism[J].Transactions of the Chinese Society for Agricultural Machinery,2012,43(8):210-214.
陈君杰,李攀磊,韩威,等.Delta机器人动力学建模与弹性误差分析[J].机电工程,2018,35(1):33-37.
CHEN Junjie,LI Panlei,HAN Wei,et al.Dynamic modeling and elastic error analysis of Delta robot[J].Mechanical and Electrical Engineering,2018,35(1):33-37.
韩亚锋,马履中,吴伟光,等.Delta并联机器人弹性动力学研究[J].农业机械学报,2011,42(10):197-202.
HAN Yafeng,MA Lüzhong,WU Weiguang,et al.Study on elastodynamics of delta parallel robots[J].Transactions of the CSAM,2011,42(10):197-202.
郑坤明,张秋菊.Delta机器人弹性动力学建模与模态分析[J].包装工程,2015,36(21):62-69.
ZHENG Kunming,ZHANG Qiuju.Modeling and modal analysis of elastodynamics for Delta robot[J].Packaging Engineering,2015,36(21):62-69.
郭菲,李永泉,宋肇经,等.旋量键合图在并联机构动力学建模中的应用[J].机械工程学报,2015,51(23):12-20.
GUO Fei,LI Yongquan,SONG Zhaojing,et al.Screw bond graph in the application of the parallel mechanism dynamics modeling[J].Journal of Mechanical Engineering,2015,51(23):12-20.
BONDERSON L S.Vector bond graphs applied to one-dimensional distributed systems[J].Journal of Dynamic Systems Measurement and Control,1975,97(1):75-82.
0
浏览量
3
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构