1.陕西科技大学 机电工程学院, 陕西 西安 710021
龚琰(1994— ),女,陕西渭南人,硕士研究生,研究方向为弧面凸轮研究。
扫 描 看 全 文
龚琰,曹巨江,张艳华.一种鼠笼式弧面凸轮行星机构[J].机械传动,2020,44(02):133-137.
Gong Yan Cao Jujiang Zhang Yanhua.A Squirrel-cage Globoidal Cam Planetary Mechanism[J].Journal of Mechanical Transmission,2020,44(02):133-137.
龚琰,曹巨江,张艳华.一种鼠笼式弧面凸轮行星机构[J].机械传动,2020,44(02):133-137. DOI: 10.16578/j.issn.1004.2539.2020.02.020.
Gong Yan Cao Jujiang Zhang Yanhua.A Squirrel-cage Globoidal Cam Planetary Mechanism[J].Journal of Mechanical Transmission,2020,44(02):133-137. DOI: 10.16578/j.issn.1004.2539.2020.02.020.
针对弧面凸轮行星机构的主要构件外环面凸轮因其超环面的结构所造成的加工难度大、成本高且整机装配精度难以保证的问题,提出一种新型的鼠笼式弧面凸轮行星机构,对机构中的外环面凸轮做了结构改进。新型结构降低了外环面凸轮的加工难度,同时避免了外环面凸轮分体式结构造成的装配精度不高的问题。对鼠笼式弧面凸轮行星机构进行三维建模及运动仿真,经验证,机构运动形式正确。
The globoidal cam planetary mechanism is difficult to machine, the assembly precision is difficult to guarantee, and its manufacturing cost is high. These problems are caused by the toroidal structure of the outer annulus cam. A new type of squirrel-cage globoidal cam planetary mechanism is proposed to solve this problem. The new type of mechanism mainly improves the structure of the outer annulus cam in the mechanism. The new structure not only reduces the difficulty of machining the outer annulus cam, but also avoiding the problem that the assembly accuracy is not high due to the outer annulus cam split structure. Through the three-dimensional modeling and motion simulation of squirrel-cage globoidal cam planetary mechanism, the accuracy of the mechanism movement is verified by the simulation results.
弧面凸轮行星机构 鼠笼式外环面凸轮 三维建模 运动学仿真
Globoidal cam planetary mechanismSquirrel-cage outer annulus cam3D modelingKinematics simulation
魏国武,姚立纲,朱晓林,等.超环面行星蜗杆传动的运动学和动力学仿真[J].机械设计与研究,2005(5):52-55.
WEI Guowu,YAO Ligang,ZHU Xiaolin,et al.Kinematics and dynamics simulation of toroidal planetary worm drive[J].Mechanical Design and Research,2005(5):52-55.
许立忠,杨育林,黄真.超环面行星蜗杆传动研究综述[J].中国工程科学,2000(6):84-88.
XU Lizhong,YANG Yulin,HUANG Zhen.A review of the research on the toroidal planetary worm drive[J].China Engineering Science,2000(6):84-88.
TRUONGV U.Minimum weight design for toroidal shells with strengthening component[J].Journal of Pressure Vessel Technology,2016,135:1-4.
张春丽,徐晓俊,董申.超环面传动的工艺改进方案及其齿面研究[J].中国机械工程,2000(7):37-40.
ZHANG Chunli,XU Xiaojun,DONG Shen.Technology improvement scheme and tooth surface research of toroidal drive[J].China Mechanical Engineering,2000(7):37-40.
付林平.半定子式小型超环面传动研究[D].秦皇岛:燕山大学,2016:4-5.
FU Linping.Research on semi stator small toroidal drive[D].Qinhuangdao:Yanshan University,2016:4-5.
曾雪莲,姚立纲.一种新型的行星蜗杆传动机构[J].机械传动,2015,39(9):164-167.
ZENG Xuelian,YAO Ligang.A new type of planetary worm drive mechanism[J].Journal of Mechanical Transmission,2015,39(9):164-167.
魏国武,姚立纲,杨蓉,等.内超环面齿轮加工的根切问题研究[J].福州大学学报(自然科学版),2005(3):309-312.
WEI Guowu,YAO Ligang,YANG Rong,et al.Study on undercutting of internal toroidal gear processing[J].Journal of Fuzhou University (Natural Science Edition),2005(3):309-312.
张磊.超环面传动计算机模拟和仿真[D].秦皇岛:燕山大学,2006:5-6.
ZHANG Lei.Computer simulation and simulation of toroidal drive [D].Qinhuangdao:Yanshan University,2006:5-6.
洪玫,姚立纲.基于数值方法的内超环面齿轮齿廓离散建模[J].图学学报,2013,34(4):88-93.
HONG Mei,YAO Ligang.Discrete modeling of internal toroidal gear tooth profile based on numerical method[J].Journal of Graphics,2013,34(4):88-93.
刘蓓蓓,曹巨江,张艳华.弧面凸轮行星机构模拟运动法建模[J].机械传动,2018,42(1):33-36.
LIU Beibei,CAO Jujiang,ZHANG Yanhua.Modeling of simulated motion of globoidal cam planetary mechanism[J].Journal of Mechanical Transmission,2018,42(1):33-36.
刘蓓蓓.弧面凸轮行星机构传动分析与三维建模研究[D].西安:陕西科技大学,2018:18-19.
LIU Beibei.Transmission analysis and 3D modeling research of globoidal cam planetary mechanism[D].Xi'an:Shaanxi University of science and technology,2018:18-19.
0
浏览量
4
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构