最新刊期
      卷 ， 期 3 ， 1996

      • Synthesis of Cycloid Crank Slider Swing-Bar Dwell Mechanism

        Issue 3, (1996) DOI: 10.16578/j.issn.1004.2539.1996.03.001
        摘要：The paper analyses the positions of Cycloidcrank-gear-linkage group at first,and gives out the calculation formula for dwell-angle and the ratio of motion-to-dwell. Finally, the output slidel swing-bar dyad is synthesised according to the different gear ratio and dwell requirements,and an example is given out.  
        关键词：Cycloid crank;Dwell Angle;Ratio of Motion-to-Dwell;Slider-Swing-Bar Dyad   
        4
        |
        214
        |
        5
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 88680456 false
        更新时间：2025-04-03
      • Issue 3, (1996) DOI: 10.16578/j.issn.1004.2539.1996.03.002
        摘要：This paper discueses the finite element method of calculating deformation at convex-arc with single-point mesh of model gi gear with double-circulararc tooth profile and presents that the factors effecting the deformation is module,helix angle and coefficient of elasticity. Based on numerical analysis,the equations of calculating the deformation by regression are given. This is usful to analysis of the deformation and vibration of the gears.  
        关键词：Gear with Double-Circular-Arc;convexArc;Calculating of Deformation   
        4
        |
        72
        |
        17
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 88680976 false
        更新时间：2025-04-03

      • 渐开线行星齿轮传动的模糊可靠性优化设计

        Issue 3, (1996) DOI: 10.16578/j.issn.1004.2539.1996.03.004
        摘要：本文分析了模糊可靠性设计的含义、特点，建立了渐开线行星齿轮传动的模糊可靠性优化设计的数学模型，并结合实例进行了优化设计，给出了最优化参数。  
        关键词：行星齿轮;优化设计;模糊可靠度   
        4
        |
        95
        |
        7
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 88681264 false
        更新时间：2025-04-03

      • 角变位齿轮传动中几个问题的理论分析

        Issue 3, (1996) DOI: 10.16578/j.issn.1004.2539.1996.03.005
        摘要：本文用数学解析法系统地论证了角变位齿轮传动设计中，在保证径向间隙不改变和无侧隙传动的条件下，齿顶必须缩短的问题。  
        关键词：间隙;角变位;齿轮传动;齿顶   
        4
        |
        97
        |
        1
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 88680221 false
        更新时间：2025-04-03
      • Issue 3, (1996) DOI: 10.16578/j.issn.1004.2539.1996.03.006
        摘要：Based on the experimental measurement of a 2-stage gear reducer on torsional vibration characteristic, the dynamic parameters are identified and a new method which uses a simplified three-mass-spring model to substitute complex gear reducer is proposed, and the simplified model characteristic parameters are identified. The effective method used in the dynamic analysis of gear transmission system has been obtained.  
        关键词：Gear Reducer;Torsional vibration characteristic;Dynamic Model   
        4
        |
        198
        |
        5
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 88680678 false
        更新时间：2025-04-03

      • Research on Manufacturing the Stator of Toroidal Drive by Enveloping Method

        Issue 3, (1996) DOI: 10.16578/j.issn.1004.2539.1996.03.007
        摘要：In this paper,the principle of toroidal drive and the forming process of the stator for this kind of drive system are analyzed. By enveloping method of gear meshing theory,the tooth profile equation of the stator is introduced. on the basis discussed above,the enveloping method of manfactruing the stator is studied and the equipment to accomplish the enveloping method is designed and manufactured. Finally,the stator of toroidal drive is manufactured on the hobbing machine by enveloping method.  
        关键词：Enveloping Method;Toroidal Drive;Stator   
        4
        |
        98
        |
        24
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 88680861 false
        更新时间：2025-04-03

      • The Research on the Tooth Profile of Variable-Speed Ball Drive

        Issue 3, (1996) DOI: 10.16578/j.issn.1004.2539.1996.03.008
        摘要：In this paper, The equations of the tooth profile curve of variable-speed ball drive are derived based on the engagement theory. The closed and successive conditions of the tooth profile curve are analysed. it provides theoretical basis for further research.  
          
        4
        |
        32
        |
        4
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 88680291 false
        更新时间：2025-04-03

      • Investigation on the Axode of the Gear Pair

        Zhang Wenxiang
        Issue 3, (1996) DOI: 10.16578/j.issn.1004.2539.1996.03.009
        摘要：In the light of the addition of two screws, the distribution of instantaneous axes along the common perpendicular of the two screws is determined and all possible sorts of axodes are derived kinematically with the pitch of the relative motion screw in the gear pair as the basis and the transmission ratio i as an independent variable.  
          
        4
        |
        86
        |
        0
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 88681108 false
        更新时间：2025-04-03

      • 摆线针轮行星减速机摆线轮一次成形的研究

        Issue 3, (1996) DOI: 10.16578/j.issn.1004.2539.1996.03.010
        摘要：大速比摆线减速机采用复合齿形、小速比采用二齿差齿形，使得减速机的承载能力大大提高。但其摆线轮需多次装卡和加工，本文介绍一种加工摆线轮的一次成形方法。  
          
        4
        |
        100
        |
        1
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 88680576 false
        更新时间：2025-04-03

      • Research on the Controlled Boiler Variator

        Issue 3, (1996) DOI: 10.16578/j.issn.1004.2539.1996.03.011
        摘要：Based on the analysis of two kinds of the controlled boiler variator, the kinematics and the dynamics of the selected variator are discussed in this paper. The formulations of it’s efficiency and torgue are given.  
        关键词：Controlled Boiler Variator;Closed Power   
        4
        |
        25
        |
        0
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 88681163 false
        更新时间：2025-04-03

      • Application of Planetary-Roller Traction Drive in Coolling Tower

        Zhou Jianjun
        Issue 3, (1996) DOI: 10.16578/j.issn.1004.2539.1996.03.012
        摘要：Planetary traction drive composed of cylindrical rollers has the feature of extreme low noise and vibration. In this paper,the principle of the planetaryrroller traction drive is studied and the design of the mechanism for producing a compressive force to be exerted between all the rollers and the ring has been done. As an application of the transmission, the main points of design of a planetary-roller traction reducer for the use of coolling tower are given.  
          
        4
        |
        65
        |
        9
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 88680157 false
        更新时间：2025-04-03

      • 新型煤矿井下带式输送机用硬齿面减速器系列

        Issue 3, (1996) DOI: 10.16578/j.issn.1004.2539.1996.03.013
        摘要：本文根据煤矿井下不同类型带式输送机特有的工作条件和结构要求，从基本原理出发，应用有限元、数值分析计算及优化设计等现代方法，进行新型煤矿井下带式输送机用减速器系列的研究开发，不仅在设计方法上有了众多创新，而且产品性能已接近国际先进水平。它彻底改变了人们对带式输送机用减速器的传统观念，使带式输送机驱动装置的技术水平上了一个台阶。  
        关键词：带式输送机;减速器;齿轮传动;结构   
        4
        |
        85
        |
        1
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 88680388 false
        更新时间：2025-04-03

      • 《中国学术期刊》（光盘版）简介

        Issue 3, (1996)
        摘要：《中国学术期刊》（光盘版）简介《中国学术期刊（光盘版）》是我国第一部具有权威性、集成化、多功能的中英文学术电子期刊。本刊由光盘国家工程研究中心、北京清华信息系统工程公司联合组建的学术电子出版物编辑部主办，清华大学出版社出版。本刊以现代信息技术手段为支...  
          
        4
        |
        22
        |
        0
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 88680651 false
        更新时间：2025-04-03

      • 工程机械齿轮的修形设计与加工

        Issue 3, (1996) DOI: 10.16578/j.issn.1004.2539.1996.03.014
        摘要：工程机械齿轮的修形设计与加工青海齿轮厂崔传勋随着工业技术的发展，高速、高载荷、高精度的传动不仅要求提高齿轮的制造精度，而且对于齿轮工作中的噪音、振动及轮齿负载的合理分布提出了更高的要求。因此有必要对齿轮轮齿的的修形设计及加工方法进一步研究探讨并推广使...  
          
        4
        |
        225
        |
        14
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 88680796 false
        更新时间：2025-04-03
      0