1.郑州机械研究所有限公司, 河南 郑州 450000
扫 描 看 全 文
王敬元,杨永飞,李俞峰等.高速转子用非接触式迷宫密封的密封性能影响因素研究[J].机械传动,2022,46(09):103-108.
Wang Jingyuan,Yang Yongfei,Li Yufeng,et al.Study on Influencing Factors of Non-contact Labyrinth Sealing Performance for High Speed Rotors[J].Journal of Mechanical Transmission,2022,46(09):103-108.
王敬元,杨永飞,李俞峰等.高速转子用非接触式迷宫密封的密封性能影响因素研究[J].机械传动,2022,46(09):103-108. DOI: 10.16578/j.issn.1004.2539.2022.09.014.
Wang Jingyuan,Yang Yongfei,Li Yufeng,et al.Study on Influencing Factors of Non-contact Labyrinth Sealing Performance for High Speed Rotors[J].Journal of Mechanical Transmission,2022,46(09):103-108. DOI: 10.16578/j.issn.1004.2539.2022.09.014.
为了提高高速齿轮箱密封装置的密封性能,对常用于石油、化工等领域中的高速齿轮传动装置的非接触式迷宫密封进行了分析。通过建立(Computational fluid dynamics,CFD)数值计算模型,分析了该密封装置的密封齿数量、密封压差、油气混合物浓度、甩油环位置等因素对各密封腔回油口回油量及漏油口泄漏量的影响。研究对高速齿轮箱用非接触式迷宫密封的设计具有指导意义。
In order to improve the sealing performance of the high-speed gearbox sealing device, this study analyzes the non-contact labyrinth sealing of the high-speed gear transmission commonly used in petroleum, chemical and other fields. By establishing a numerical calculation model, the influence of factors such as the number of sealing teeth sealing differential pressure, oil-air mixture concentration,and position of oil slinger on the leakage of oil return ports and oil leakage ports of each sealing cavity is analyzed, which has guiding significance for the design of non-contact labyrinth sealing for high-speed gearboxes.
非接触式迷宫密封密封齿数量密封内外压差油气混合物浓度甩油环位置
Non-contact labyrinth sealingNumber of sealing teethSealing differential pressureMixture concentrationPosition of oil slinger
塔鲁达纳夫斯基 K.非接触密封[M].李均卿,刁元康,译.北京:机械工业出版社,1986:77-219.
TARUDANAVSKY K.Non contact seal[M].LI Junqing,DIAO Yuankang,Jr.Beijing:China Machine Press,1986:77-219.
MARTIN H M.Labyrinth packing[J].Engineering,1931:3536.
付平,常德功.密封设计手册[M].北京:化学工业出版社,2011:198-200.
FU Ping,CHANG Degong.Seal design manual [M].Beijing:Chemical Industry Press,2011:198-200.
EGLI A.The leakage of steam through labyrinth seals[J].Transaction of ASME,1935,57:115-122.
VERMES G.A fluid mechanics approach to the labyrinth seal leakage problem[J].Journal of Engineering for Gas Turbines and Power,1961,83(2):161.
STOFF H.Incompressible flow in a labyrinth seal[J].Journal of Fluid Mechanics,1980,100(4):817-829.
RHODE D L,DEMKO J,TRAGNER U K,et al.Prediction of incompressible flow in labyrinth seal[J].ASME Journal of Fluids Engineering,1986,108(1):19-25.
DEMKO J A,MORRISON G L,RHODE D L.The prediction and measurement of incompressible flow in a labyrinth seal[J].ASME Journal of Engineering Gas Turbines Power,1989,111(4):697-702.
MOORE J J.Three-dimensional CFD rotordynamic analysis of gas labyrinth seals[J].Journal of Vibration & Acoustics,2003,125(4):427-433.
MEHRA A.A finite volume model for calculation of leakage and hydrodynamic forces in gas seals[D].University of Virginia,1995:1-117.
KIM T S,CHA K S.Comparative analysis of the influence of labyrinth seal configuration on leakage behavior[J].Journal of Mechanical Science and Technology,2009,23(10):2830-2838.
李志刚,郎骥,李军,等.迷宫密封泄漏特性的试验研究[J].西安交通大学学报,2011,45(3):48-52.
LI Zhigang,LANG Ji,LI Jun,et al.Experimental study on leakage characteristics of labyrinth seals[J].Journal of Xi'an Jiaotong University,2011,45(3):48-52.
李志刚,李军,丰镇平.蜂窝密封流动特性的数值研究和泄漏量计算公式的构造[J].机械工程学报,2011,47(2):142-148.
LI Zhigang,LI Jun,FENG Zhenping.Numerical study on flow characteristics of honeycomb seal and construction of leakage calculation formula[J].Journal of Mechanical Engineering,2011,47(2):142-148.
林丽,刘卫华.基于FLUENT的迷宫密封机理研究[J].中国机械工程,2010(18):2183-2186.
LIN Li,LIU Weihua.Research on labyrinth seal mechanism based on FLUENT[J].China Mechanical Engineering,2010(18):2183-2186.
郭兆元,张嘉禾,万荣华,等.迷宫密封通道内流动特性数值仿真[J].鱼雷技术,2013,21(5):364-368.
GUO Zhaoyuan,ZHANG Jiahe,WAN Ronghua,et al.Numerical simulation of flow characteristics in labyrinth seal channel[J].Torpedo Technology,2013,21(5):364-368.
0
Views
3
下载量
0
CSCD
Publicity Resources
Related Articles
Related Author
Related Institution