Influence of Base Oil on Planar Double Enveloping Hourglass Worm Drive

Fayang He; Zhanshan Li

doi:10.16578/j.issn.1004.2539.2021.11.019

您当前的位置：

首页 >

文章列表页 >

Influence of Base Oil on Planar Double Enveloping Hourglass Worm Drive

Test·Analysis | 更新时间：2022-11-10

- Influence of Base Oil on Planar Double Enveloping Hourglass Worm Drive
- Journal of Mechanical Transmission Vol. 45, Issue 11, Pages: 123-127(2021)
- 作者机构：
  
  1.上海合纵重工机械有限公司，上海 201506
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2021.11.019
  CLC：
扫描看全文
和法洋,李展山.基础油对平面二次包络环面蜗杆传动的影响试验[J].机械传动,2021,45(11):123-127.

He Fayang,Li Zhanshan.Influence of Base Oil on Planar Double Enveloping Hourglass Worm Drive[J].Journal of Mechanical Transmission,2021,45(11):123-127.
和法洋,李展山.基础油对平面二次包络环面蜗杆传动的影响试验[J].机械传动,2021,45(11):123-127. DOI： 10.16578/j.issn.1004.2539.2021.11.019.

He Fayang,Li Zhanshan.Influence of Base Oil on Planar Double Enveloping Hourglass Worm Drive[J].Journal of Mechanical Transmission,2021,45(11):123-127. DOI： 10.16578/j.issn.1004.2539.2021.11.019.

摘要

为了研究不同基础油对平面二次包络环面蜗杆传动的影响，进行了跑合试验。试验发现，相对于聚α-烯烃合成油，采用聚乙二醇合成油时，其传动效率会提高4.5%左右，温升降低15 ℃；采用矿物油时，其传动效率则会降低10%左右，温升提高58 ℃以上。长期连续工作的平面二次包络环面蜗杆减速器采用聚乙二醇合成油性能更佳；矿物油仅适用于非连续工作且负载较低的场合。当采取散热措施后，可以使用聚α-烯烃合成油。进一步研究发现，最小油膜厚度不足以完全反映采用不同基础油在传动效率和温升方面产生的差异，但是可以用来评价润滑状态。

Abstract

In order to study the influence of different base oils on the lubrication of planar double enveloping hourglass worm drive，running in test is carried out. It is found that，when using polyethylene glycol synthetic oil，the transmission efficiency increases by 4.5% and the temperature rise is 15 ℃ lower than that of poly-alpha-olefins synthetic oil. When mineral oil is used，the transmission efficiency will be reduced by about 10%，and the temperature rise will increase by more than 58 ℃. Polyethylene glycol synthetic oil has the better performance for long-term continuous working plane double enveloping hourglass worm reducer. Mineral oil is only suitable for discontinuous operation and low load applications. When heat dissipation measures are taken，poly-alpha-olefins synthetic oil can be used. Further research shows that the minimum film thickness is not enough to fully reflect the difference of transmission efficiency and temperature rise caused by different base oils，but it can be used to evaluate the lubrication state.

关键词

环面蜗杆基础油传动效率温升最小油膜厚度

Keywords

Hourglass wormBase oilTransmission efficiencyTemperature riseMinimum film thickness

references

孟惠荣，连香姣，范迅，等.平面二次包络环面蜗杆传动润滑油性能的研究［J］.机械传动，1994（3）：43-46.

MENG Huirong，LIAN Xiangjiao，FAN Xun，et al.Experimental research on lubricants for double enveloping wormgearing generated for planar surface［J］.Journal of Mechanical Transmission，1994（3）：43-46.

曹兴进，韦云隆，陈曼.二次包络蜗轮副润滑油性能的试验研究［J］.机械传动，1994（3）：46-50.

CAO Xingjin，WEI Yunlong，CHEN Man.Analyses and testing of lubricants for double enveloping worm gearing［J］.Journal of Mechanical Transmission，1994（3）：46-50.

李学雷，徐钢涛，潘卫彬，等.油品组成对蜗杆副承载能力的影响［J］.机械传动，2005（6）：56-57.

LI Xuelei，XU Gangtao，PAN Weibin，et al.The effect of lubricating oil on the anti-scuffing capacity of warm gear pair［J］.Journal of Mechanical Transmission，2005（6）：56-57.

徐钢涛，赵晓，戚文正.油品组成对蜗杆副传动效率的影响［J］.机械传动，2006（6）：87-89.

XU Gangtao，ZHAO Xiao，QI Wenzheng.The effect of lubricating oil on the efficiency of warmgearing［J］.Journal of Mechanical Transmission，2006（6）：87-89.

和法洋.平面二次包络环面蜗杆传动性能分析与关键制造技术研究［D］.北京：北京工业大学，2018：91-105.

HE Fayang.Performance analysis and key manufacturing technology of planar double enveloping hourglass worm gears［D］.Beijing：Beijing University of Technology，2018：91-105.

吴晓铃.润滑设计手册［M］.北京：化工出版社，2006：480.

WU Xiaoling.Lubrication design handbook［M］.Beijing：Chemical Industry Press，2006：480.

中华人民共和国国家发展和改革委员会.平面包络环面蜗杆减速器：JB/T 9051-2010［S］.北京：中国标准出版社，2010：2-19.

National Development and Reform Commission of the people's Republic of China.Planar enveloping worm gearing reducers：JB/T 9051-2010［S］.Beijing：Standards Press of China，2010：2-19.

中国石油化工总公司.蜗轮蜗杆油：SH/T 0094-91［S］.北京：中国标准出版社，1991：1.

China Petrochemical Corporation.Worm gear oil：SH/T 0094-91［S］.Beijing：Standards Press of China，1991：1.

向晖，王习光，王一助.合成型蜗轮蜗杆油的发展及应用［J］.润滑与密封，2017，42（3）：134-136.

XIANG Hui，WANG Xiguang，WANG Yizhu.Development and application of synthetic worm gear oils［J］.Lubrication Engineering，2017，42（3）：134-136.

潘卫彬，李学雷，戚文正.蜗轮蜗杆油应用技术研究［J］.机械传动，2006（4）：74-76.

PAN Weibin，LI Xuelei，QI Wenzheng.The application technology research of warm oil［J］.Journal of Mechanical Transmission，2006（4）：74-76.

上海富沃地润滑油有限公司.鲁拜因蜗轮蜗杆油#680 产品安全数据表［R］.上海：上海富沃地润滑油有限公司，2013：1.

Shanghai Fuwodi Lubricating Oil Co.，Ltd.Product safety data sheet of rubin gear worm oil 680［R］.Shanghai：Shanghai Fuwodi Lubricating Oil Co.，Ltd.，2013：1.

上海纳克润滑技术有限公司.全合成工业齿轮油VG320产品检验报告单［R］.上海：上海纳克润滑技术有限公司，2016：1.

Shanghai NACO Lubrication Co.，Ltd.Inspection report of VG320 product［R］.Shanghai：Shanghai NACO Lubrication Co.，Ltd.，2016：1.

ExxonMobil China Investment Co.，Ltd.Mobil Glygoyle 320［R］.Shanghai：ExxonMobil （China） Investment Co.Ltd，2015：4.

SHI Z Y，YU B，HE F Y.Precision measurement of planar double-enveloping hourglass worms［J］.Measurement.2016，91：177-185.

石照耀，于渤，叶勇，等.环面蜗轮滚刀测量机［J］.光学精密工程，2015，23（10）：2827-2834.

SHI Zhaoyao，YU Bo，YE Yong，et al.Hourglass hob measuring machine［J］.Optics and Precision Engineering，2015，23（10）：2827-2834.

董学朱.环面蜗杆传动设计与修形［M］.北京：机械工业出版社，2004：9.

DONG Xuezhu.Design and modification of hourglass worm drive［M］.Beijing：Machinery Industry Press，2004：9.

王延忠，周云飞，周济，等.基于弹流润滑的弧齿锥齿轮的加工修正方法［J］.机械工程学报，2002（7）：70-75.

WANG Yanzhong，ZHOU Yunfei，ZHOU Ji，et al.Correctional method of spiral bevel gear machining based on elastohydrodynamic lubrication［J］.Journal of Mechanical Engineering，2002（7）：70-75.

谭昕，张仲甫.平面二次包络环面蜗轮副润滑油膜厚度优化设计［J］.现代机械，2002（2）：19-22.

TAN Xin，ZHANG Zhongfu.Optimization design of lubricant film thickness for planar double enveloping hourglass worm gear pair［J］.Modern Machinery，2002（2）：19-22.

张彦钦，张光辉.平面二次包络环面蜗杆副应力及影响因素分析［J］.中国机械工程，2011，22（10）：1135-1138.

ZHANG Yanqin，ZHANG Guanghui.Analysis on stress distribution and influencing factors of planar double enveloping hourglass worm gears［J］.China Mechanical Engineering，2011，22（10）：1135-1138.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Lightweight Design and Production Practice of the Heavy Truck Drive Axle

Power Flow Analysis and Transmission Efficiency Calculation of RV-like Reducers

Research on Factors Affecting the Reducer Transmission Efficiency of Electric Vehicles

Study on the Influence of Bearings on Transmission Efficiency of Manual Transmission and Optimization

Design and Experiment Research of Accelerated Fatigue Life Tester for Plastic Gear

Related Author

No data

Related Institution

Baotou Beiben Heavy Truck Bridge Box Co., Ltd., Inner Mongolia First Machinery Group Co., Ltd.

Shaanxi Coal Group Shenmu Caringtiaota Mining Co., Ltd., Shenmu

School of Intelligent Manufacturing and Information Engineering, Shaanxi Energy Institute

School of Mechanical Engineering and Automation， Zhejiang Sci-Tech University

Key Laboratory of New Energy Automotive Drive Systems for Zhejiang Market Regulation， Zhejiang Fangyuan Test Group Co.， Ltd.

⁰