Zhang Chunyan,Liu Xiangyu,Ni Cong,et al.Type Synthesis of Mobile Mechanisms with Multiple Modes based on Single-loop Kinematic Chains[J].Journal of Mechanical Transmission,2020,44(04):17-25.
Zhang Chunyan,Liu Xiangyu,Ni Cong,et al.Type Synthesis of Mobile Mechanisms with Multiple Modes based on Single-loop Kinematic Chains[J].Journal of Mechanical Transmission,2020,44(04):17-25. DOI: 10.16578/j.issn.1004.2539.2020.04.003.
Type Synthesis of Mobile Mechanisms with Multiple Modes based on Single-loop Kinematic Chains
Aiming at the functional requirements of mobile mechanisms with multiple modes,a design scheme based on single-loop kinematic chains is proposed.Firstly,according to the single-loop freedom formula,the conditions satisfying the single-loop and can be active are determined,and the combination relationships among the order of the constrained screw system,the number of bars,the number of kinematic pairs and the degree of freedom of the single-loop kinematic chains are obtained.Secondly,based on the screw theory,the geometric conditions of the axis of kinematic pairs under different constrained screw orders are obtained by using the virtual work principle.Taking the R and P pairs as the design units,all the possible combinations of the single-loop kinematic chains under different degrees of freedom are enumerated,and then the constructed single-loop kinematic chains are used as the body or branch to construct a kind of mobile mechanisms with multiple modes.Finally,the steps of type synthesis of mobile mechanisms with multiple modes and some design cases are given,which verifies the feasibility and practicability of the proposed design theory and design method.
关键词
单环运动链螺旋理论多模式移动机构型综合自由度
Keywords
Single-loop kinematic chainsScrew theoryMobile mechanism with multiple modesType synthesisDegree of freedom
references
MIAO Z H,WANG J Y,LI B.Mobile robot with multiple modes based on 4-URU parallel mechanism[J].New Trends in Mechanism and Machine Science,2017,43:339-407.
ZHANG W X,LU S N,DING X L.Recent development on innovation design of reconfigurable mechanisms in China[J].Front of Mechannical Engineering,2018,14(1):15-20.
TIAN Y B,ZHANG D,YAO Y A,et al.A reconfigurable multi-mode mobile parallel robot[J].Mechanism and Machine Theory,2017,111:39-65.
MIAO Z H,YAO Y A,KONG X W.Biped walking robot based on a 2-UPU+2-UU parallel mechanism[J].Chinese Journal of Mechanical Engineering,2014,27(2):269-278.
WANG N Y,FANG Y F,ZHANG D.A spatial single loop kinematotropic mechanism used for biped/wheeled switchable robots[J].International Journal of Mechanics and Materials in Design,2015,11(3):287-299.
WANG Jieyu.Research on mobile robots with multiple modes based on 4R linkages and uru-chain parallel mechanisms[J].Beijing: Beijing Jiaotong University,2015:43-94.
YU Jingjun,LIU Xinjun,DING Xilun,et al.Mathematic foundation of mechanisms and robotics[M].Beijing:China Machine Press,2008:100-256.
KONG X W,GOSSELIN C M,RICHARD P L.Type synthesis of parallel mechanisms with multiple operation modes[J].Journal of Mechanical Design,2007,129(6):595-601.
HUANG Z,LI Q C.Type synthesis of symmetrical lower mobility parallel mechanisms using the constraint-synthesis method[J].International Journal of Robotics Research,2003,22(1):59-82.
SONG Y M,HAN P P,WANG P F.Type synthesis of 1T2R and 2R1T parallel mechanisms employing conformal geometric algebra[J].Mechanism and Machine Theory,2018,121:475-486.
KONG X W,GOSSELIN C M.Type synthesis of 3-DOF spherical parallel manipulators based on screw theory[J].Journal of Mechanical Design,2004,126:101-108.
MIOMIR V,JURiIJ S.Mathematical models of general anthropomorphic systems[J].Mathematical Biosciences,1973,17(3/4):191-242.