Du Yangyang,Wang Xiaosun,Yang Xue,et al.Influence of Center Component Floating on the Load-sharing Characteristic of Planetary Transmission System[J].Journal of Mechanical Transmission,2019,43(03):11-16.
Du Yangyang,Wang Xiaosun,Yang Xue,et al.Influence of Center Component Floating on the Load-sharing Characteristic of Planetary Transmission System[J].Journal of Mechanical Transmission,2019,43(03):11-16. DOI: 10.16578/j.issn.1004.2539.2019.03.003.
Influence of Center Component Floating on the Load-sharing Characteristic of Planetary Transmission System
In order to investigate the load-sharing performance of the 2K-H planetary gear transmission system, a translation-torsion coupling dynamics model is established with considering the nonlinear factors of time-varying meshing stiffness and the overall meshing error and so on, the dimensionless differential equations with 18 degrees of freedom of the system are deduced in this model. By solving the differential equations, the influences of the support stiffness of the center component and the clearance floating on the load-sharing performance of the planetary gear train are analyzed. It is shown that the floating amount of the component increases with the reduction of the support stiffness of the center component and the increase of the clearance of the shaft hole within a certain range, the load-sharing factor of the system decreases when the floating amount of the component increases.
KAHRAMAN A. Load sharing characteristics of planetary transmissions[J]. Mechanism and Machine Theory, 1994, 29(8):1151-1165.
KAHRAMAN A. Static load sharing characteristics of transmission planetary gear sets: model and experiment[J]. SAE Transactions, 1999, 108(6):1954-1963.
TSAI S J, YE S Y, HUANG G L. An approach for analysis of load sharing in planetary gear drives with a floating sun gear[C]// Proceedings of the ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, August 28-31, 2011, Washington, D C, USA. New York:ASME, c2011:249-258.
DONG H, DUAN L L, ZHANG J A, et al. Load-sharing characteristics of power-split transmission system based on deformation compatibility and loaded tooth contact analysis[J]. International Journal of Aerospace Engineering, 2015, 2015(7):1-11.
TANG J Y, LIU Y, CAI W X. The principles of selecting floating members of 2K-H planetary gears for load balancing design[J]. Proceedings of the Institution of Mechanical Engineers Part C:Journal of Mechanical Engineering Science, 2017,231(9):1589-1598.