Study Method of Dynamic Performance of Spiral Bevel Gear based on Abaqus

Gang Wei; Zhonghou Wang; Han Wu

doi:10.16578/j.issn.1004.2539.2019.02.022

您当前的位置：

首页 >

文章列表页 >

Study Method of Dynamic Performance of Spiral Bevel Gear based on Abaqus

Test·Analysis | 更新时间：2022-10-09

- Study Method of Dynamic Performance of Spiral Bevel Gear based on Abaqus
- Journal of Mechanical Transmission Vol. 43, Issue 2, Pages: 118-121(2019)
- 作者机构：
  
  1.上海理工大学机械工程学院，上海 200093
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2019.02.022
  CLC：
扫描看全文
危刚,汪中厚,吴晗.基于Abaqus弧齿锥齿轮动态特性研究方法[J].机械传动,2019,43(02):118-121.

Wei Gang,Wang Zhonghou,Wu Han.Study Method of Dynamic Performance of Spiral Bevel Gear based on Abaqus[J].Journal of Mechanical Transmission,2019,43(02):118-121.
危刚,汪中厚,吴晗.基于Abaqus弧齿锥齿轮动态特性研究方法[J].机械传动,2019,43(02):118-121. DOI： 10.16578/j.issn.1004.2539.2019.02.022.

Wei Gang,Wang Zhonghou,Wu Han.Study Method of Dynamic Performance of Spiral Bevel Gear based on Abaqus[J].Journal of Mechanical Transmission,2019,43(02):118-121. DOI： 10.16578/j.issn.1004.2539.2019.02.022.

摘要

以CATIA二次开发建立的弧齿锥齿轮三维模型为研究对象，利用Abaqus软件对弧齿锥齿轮进行仿真分析，仿真了在不同载荷下弧齿锥齿轮的动态性能，进行了接触分析，提取了传动误差曲线。结果表明，随着载荷的增大，齿轮的传动误差波动幅值随之减小，但偏离零线的幅度随之增大，表明弧齿锥齿轮在载荷增大的情况下传动更加平稳，传动精度随之降低。

Abstract

Taking the 3D model of spiral bevel gear built by CATIA through the secondary development as research object， the simulation analysis of spiral bevel gear is carried out by using Abaqus software， and the dynamic performance of spiral bevel gear under different loads is simulated. The contact analysis s conducted and the curve of transmission error is extracted. The results show that the fluctuation amplitude of gear transmission error decreases with the increase of load， but the deviation from the zero line increases. It indicates that the spiral bevel gear drives more smoothly with increased load， the transmission accuracy decreased accordingly.

关键词

弧齿锥齿轮动态性能传动误差接触分析

Keywords

Spiral bevel gearDynamic performanceTransmission errorContact analysis

references

黄天铭，梁锡昌. 齿轮加工技术的现状及进展［J］. 机械工艺师， 1994（4）：29-31.

刘光磊，樊红卫，谷霁红，等.一种弧齿锥齿轮传动性能优化方法［J］. 航空学报， 2010， 31（8）：1680-1687.

唐进元，蒲太平. 基于有限元法的弧齿锥齿轮啮合刚度计算［J］.机械工程学报， 2011， 47（11）：23-29.

汪中厚，莫逗，李克松. 弧齿锥齿轮切齿仿真和虚拟齿面误差检验［J］. 现代制造工程， 2012 （1）：22-25.

程中娜. 基于ABAQUS的智能有限元分析前处理技术研究［D］.济南：山东大学， 2017：11-15.

汪中厚，李刚，久保爱三.基于数字化真实齿面的弧齿锥齿轮齿面接触分析［J］. 机械工程学报， 2014， 50（15）：1-11.

吉强，方宗德，王侃伟，等. 齿轮的传动误差检测方法研究［J］. 机械科学与技术，2009，28（12）：1652-1656.

汪中厚，王杰，王巧玲，等. 基于有限元法的弧齿锥齿轮传动误差研究［J］. 振动与冲击， 2014， 33（14）：165-170.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Correlation Between Involute Profile Waviness and Gear Transmission Performance

Research on Meshing Simulation Analysis Method for Complex Flanks Based on Surface Synthesis Method

Optimization of Contact Path and Transmission Error based on Installation and Adjustment of Spiral Bevel Gear

Actual Gear Surface Static Unloaded Transmission Error of Spiral Bevel Gear and Its Effect on Dynamic Characteristic

Modeling and Dynamic Contact Analysis of Spiral Bevel Gear based on Pro/E and Abaqus

Related Author

No data

Related Institution

Beijing Engineering Research Center of Precision Measurement Technology and Instruments,Beijing University of Technology

School of Mechanical and Electronic Engineering, Henan University of Science and Technology

Shaanxi Key Laboratory of Gear Transmission，Shaanxi Fast Gear Co.，Ltd.

College of Mechanical and Vehicle Engineering，Hunan University

State Key Laboratory of High Performance Complex Manufacturing， Central South University

⁰