Structural Stress Analysis of the Core Component of Harmonic Reducer

Zhang Lei; Yang Weichao; Jiang Qianqian; Wang Cheng; Huang Wei

doi:10.16578/j.issn.1004.2539.2018.12.021

您当前的位置：

首页 >

文章列表页 >

Structural Stress Analysis of the Core Component of Harmonic Reducer

更新时间：2022-10-20

- Structural Stress Analysis of the Core Component of Harmonic Reducer
- Vol. 42, Issue 12, Pages: 114-117(2018)
- 作者机构：
  
  1. 重庆大学机械传动国家重点实验室
  2. 中航工业长空精密机械制造公司
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2018.12.021
  CLC：
扫描看全文
[1]张雷,杨伟超,蒋倩倩,王成,黄维.谐波减速器核心部件结构应力分析[J].机械传动,2018,42(12):114-117+122.

Zhang Lei, Yang Weichao, Jiang Qianqian, et al. Structural Stress Analysis of the Core Component of Harmonic Reducer. [J]. 42(12):114-117(2018)
[1]张雷,杨伟超,蒋倩倩,王成,黄维.谐波减速器核心部件结构应力分析[J].机械传动,2018,42(12):114-117+122. DOI： 10.16578/j.issn.1004.2539.2018.12.021.

Zhang Lei, Yang Weichao, Jiang Qianqian, et al. Structural Stress Analysis of the Core Component of Harmonic Reducer. [J]. 42(12):114-117(2018) DOI： 10.16578/j.issn.1004.2539.2018.12.021.

摘要

针对柔轮设计中高寿命、高承载能力的问题,以柔轮各部分圆角和波发生器为研究对象,在ANSYS中进行参数化建模,采用中心复合设计方法进行试验采样,并基于响应面法进行优化分析,选取了柔轮刚度和内壁、齿圈、杯底3处应力观测点为观测对象,得出了各圆角尺寸对应力和刚度的影响规律;分析结果表明,增大柔轮各倒角结构尺寸,能有效降低各处应力集中情况,提高柔轮刚度;在综合考虑柔轮应力与刚度变化情况的基础上,选取了柔轮设计最优的结构参数;为增加柔轮刚度,改善柔轮承载能力,在柔轮杯底设计了拔模特征,并对该结构进行了分析和优化;可以增大非标准椭圆凸轮波发生器短轴径向变形量以减小柔轮应力。

Abstract

Aiming at the design problem of high lifespan and high bearing capacity of flexspline,taking the fillets and generator as the research object,parametric model are performed in ANSYS by response surface method and the central composite design method is used for sampling. The stiffness and stress at three points are selected as observation objects and the influence law of each fillet parameter are obtained. The analysis results show that increasing the size of each fillet can effectively reduce the stress concentration in various places and increase the stiffness. Based on the comprehensive consideration of the stress and stiffness,the optimum structural parameters are selected. In order to increase the stiffness and improve the bearing capacity of the flexspline,the drafting feature is designed at the bottom of the flexspline,and the parameter is analyzed and optimized. The short axis radial deformation of the non-standard elliptical cam generator can be increased to reduce the stress.

关键词

柔轮有限元结构设计优化设计刚度拔模特征非标准椭圆凸轮

Keywords

FlexsplineFEMStructure designOptimization designStiffnessDrafting featureNon-standard elliptical cam

references

Views

393

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Structure Design and Kinematic Stability Study of a Forward Ladder Climbing Wheelchair

Structural Design and Implementation of Simulating Galago Senegalensis Monkey Single-leg Jumping Robots

Multi-objective Optimization Design of Wet Friction Clutches

Fracture Analysis on Flexspline and Flexible Bearing of the Harmonic Reducer

Finite Element Analysis of Flexsplines of Cone-beam Oral CT Harmonic Reducers

Related Author

No data

Related Institution

School of Mechanical and Electrical Engineering, Jiangxi University of Science and Technology

School of Machinery and Automation, Wuhan University of Science and Technology

Key Laboratory of Metallurgical Equipment and Control Technology of the Ministry of Education, Wuhan University of Science and Technology

Hubei Key Laboratory of Mechanical Transmission and Manufacturing Engineering, Wuhan University of Science and Technology

School of Mechanical Engineering, Sichuan University

⁰