Modeling and Dynamic Contact Analysis of Spiral Bevel Gear based on Pro/E and Abaqus

Yu Zihao; Liu Zuoshi; Zhang Ping

doi:10.16578/j.issn.1004.2539.2018.10.016

您当前的位置：

首页 >

文章列表页 >

Modeling and Dynamic Contact Analysis of Spiral Bevel Gear based on Pro/E and Abaqus

更新时间：2022-10-20

- Modeling and Dynamic Contact Analysis of Spiral Bevel Gear based on Pro/E and Abaqus
- Vol. 42, Issue 10, Pages: 83-90(2018)
- 作者机构：
  
  1. 江西理工大学机电工程学院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2018.10.016
  CLC：
扫描看全文
[1]喻子豪,刘祚时,张平.基于Pro/E和Abaqus的弧齿锥齿轮建模与动态接触分析[J].机械传动,2018,42(10):83-90.

Yu Zihao, Liu Zuoshi, Zhang Ping. Modeling and Dynamic Contact Analysis of Spiral Bevel Gear based on Pro/E and Abaqus. [J]. 42(10):83-90(2018)
[1]喻子豪,刘祚时,张平.基于Pro/E和Abaqus的弧齿锥齿轮建模与动态接触分析[J].机械传动,2018,42(10):83-90. DOI： 10.16578/j.issn.1004.2539.2018.10.016.

Yu Zihao, Liu Zuoshi, Zhang Ping. Modeling and Dynamic Contact Analysis of Spiral Bevel Gear based on Pro/E and Abaqus. [J]. 42(10):83-90(2018) DOI： 10.16578/j.issn.1004.2539.2018.10.016.

摘要

基于弧齿锥齿轮的成型原理,得到了弧齿锥齿轮齿面三维坐标方程。依照Gleason公司所提供的弧齿锥齿轮计算调整卡,编写MATLAB程序,求解出各齿面离散点的三维坐标,运用三维造型软件,建立弧齿锥齿轮副的三维模型。把三维模型导入到有限元软件Abaqus中,创建了弧齿锥齿轮副的有限元模型,完成了弧齿锥齿轮副的接触分析。根据分析结果,获得某一对轮齿在一个完整的啮合周期内,齿面啮合点处接触正压力的变化情况,并用实验验证了仿真结果的准确性,为弧齿锥齿轮的设计、制造、优化提供了参考依据和技术支持。

Abstract

The three-dimension coordinate equation of tooth surface of spiral bevel gear is obtained based on the forming principle of spiral bevel gear. According to the spiral bevel gear computational adjustment cards provided by the Gleason company,the three-dimensional model of spiral bevel gear pair is established by writing the MATLAB program to solve out the 3 D coordinates of discrete points on the tooth surface and using three dimensional modeling software. The contact analysis of bevel gear pair is completed by importing the 3 D model into the finite element software Abaqus to create the finite element model of spiral bevel gear. According to the analysis results,the change of the contact positive pressure of a pair of gear teeth in a complete meshing cycle is obtained,and the accuracy of the simulation results is verified by experiments which provides reference and technical support for the design,manufacture and optimization of spiral bevel gear.

关键词

弧齿锥齿轮齿面方程ABAQUS接触分析

Keywords

Spiral bevel gearTooth surface equationABAQUSContact analysis

references

Views

481

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Actual Gear Surface Static Unloaded Transmission Error of Spiral Bevel Gear and Its Effect on Dynamic Characteristic

Study Method of Dynamic Performance of Spiral Bevel Gear based on Abaqus

Modification Design and Experimental Verification of Spiral Bevel Gear Tooth Surface Based on Quantitative Mismatch

Simulation Analysis of Residual Stresses in Spiral Bevel Gear Machining Based on an Oblique Cutting Model

Influence of Error Factors on Transmission Contact for Spiral Bevel Gears

Related Author

No data

Related Institution

State Key Laboratory of High Performance Complex Manufacturing， Central South University

College of Mechanical Engineering， University of Shanghai for Science and Technology

School of Mechatronics Engineering, Henan University of Science and Technology

Zhejiang Tongli Transmission Technology Co., Ltd., Rui'an

Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education, Tianjin University

⁰