Design and Analysis of a New Type of Groove Wheel Mechanism based on ADAMS

Wu Lipeng; Wang Zhenhong; Jia Wenbo; Wang Lei

doi:10.16578/j.issn.1004.2539.2018.03.033

您当前的位置：

首页 >

文章列表页 >

Design and Analysis of a New Type of Groove Wheel Mechanism based on ADAMS

更新时间：2022-10-20

- Design and Analysis of a New Type of Groove Wheel Mechanism based on ADAMS
- Vol. 42, Issue 3, Pages: 160-163(2018)
- 作者机构：
  
  1. 长春理工大学机电工程学院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2018.03.033
  CLC：
扫描看全文
[1]吴利朋,王振宏,贾文博,王磊.基于ADAMS的一种新型槽轮机构的设计分析[J].机械传动,2018,42(03):160-163+184.

Wu Lipeng, Wang Zhenhong, Jia Wenbo, et al. Design and Analysis of a New Type of Groove Wheel Mechanism based on ADAMS. [J]. 42(3):160-163(2018)
[1]吴利朋,王振宏,贾文博,王磊.基于ADAMS的一种新型槽轮机构的设计分析[J].机械传动,2018,42(03):160-163+184. DOI： 10.16578/j.issn.1004.2539.2018.03.033.

Wu Lipeng, Wang Zhenhong, Jia Wenbo, et al. Design and Analysis of a New Type of Groove Wheel Mechanism based on ADAMS. [J]. 42(3):160-163(2018) DOI： 10.16578/j.issn.1004.2539.2018.03.033.

摘要

槽轮机构具有间歇性运动及大传动比的特点,广泛应用于放映机、加工中心、包装机等机械系统中。但是随着转停比的增大,槽数的增加,槽轮机构不能平稳运行。为了解决这个问题,在原有槽轮机构基础上,增加了一个辅助锁止轮,运用Solid Works三维软件建立槽轮机构三维模型,结合虚拟样机软件ADAMS对槽轮机构进行运动仿真分析,验证并给出了大传动比情况下整个传动过程受控稳定条件。

Abstract

The groove wheel mechanism has the characteristics of intermittent movement and large transmission ratio,it is widely used in the machine system of projector,machining center and packaging machine.But with the increase of the rotation ratio,the groove wheel mechanism can’t run smoothly. In order to solve this problem,on the basis of the original groove wheel mechanism,an auxiliary locking wheel is added to realize the smooth operation of the groove wheel mechanism under the large turning and stopping ratio. By using Solid Works three-dimensional software,the three-dimensional model of the groove wheel mechanism is established,combined with the virtual prototype software ADAMS,the motion simulation of the groove wheel mechanism is carried out,the stability conditions of the whole transmission process under the condition of large-turn-stop ratio are proved.

关键词

槽轮机构Adams运动仿真稳定条件

Keywords

Groove wheel mechanismAdamsMotion simulationStability condition

references

Views

278

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Motion Simulation and Strength Analysis of Drill Pipe Handing Manipulator

Parameter Optimization Design of the Aged Chair Auxiliary Standing Mechanism

Contact Simulation and Dynamic Performance Test of Ease-off Modified High Reduction Hypoid Gears

Research and Simulation of Cornering Characteristics on Oil and Gas Pipeline Robots

Motion Characteristics Analysis and Simulation of Limited Slip Differential with Curve-faced Gear Pair

Related Author

No data

Related Institution

Engineering Training Center,Southwest Petroleum University

College of Petroleum Engineering,Southwest Petroleum University

Zhejiang Henglin Chair Industry Co.,Ltd.

Key Laboratory of Special Equipment Manufacturing and Advanced Processing Technology of Ministry of Education and Zhejiang Province,Zhejiang University of Technology

School of Mechanical & Electronic Engineering, Henan University of Science & Technology

⁰