Simulation Research of Engaging Process of Clutch based on ADAMS

Liu Xiaochu; Chen Youcheng; Jiang Yin; Cao Jie; Chen Ningbo

doi:10.16578/j.issn.1004.2539.2017.10.026

您当前的位置：

首页 >

文章列表页 >

Simulation Research of Engaging Process of Clutch based on ADAMS

更新时间：2022-10-20

- Simulation Research of Engaging Process of Clutch based on ADAMS
- Vol. 41, Issue 10, Pages: 136-139(2017)
- 作者机构：
  
  1. 广州大学机械与电气工程学院
  2. 广州大学金属材料强化研磨高性能加工重点实验室
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2017.10.026
  CLC：
扫描看全文
[1]刘晓初,陈宥丞,姜引,曹杰,陈宁波.基于ADAMS的离合器接合过程仿真研究[J].机械传动,2017,41(10):136-139.

Liu Xiaochu, Chen Youcheng, Jiang Yin, et al. Simulation Research of Engaging Process of Clutch based on ADAMS. [J]. 41(10):136-139(2017)
[1]刘晓初,陈宥丞,姜引,曹杰,陈宁波.基于ADAMS的离合器接合过程仿真研究[J].机械传动,2017,41(10):136-139. DOI： 10.16578/j.issn.1004.2539.2017.10.026.

Liu Xiaochu, Chen Youcheng, Jiang Yin, et al. Simulation Research of Engaging Process of Clutch based on ADAMS. [J]. 41(10):136-139(2017) DOI： 10.16578/j.issn.1004.2539.2017.10.026.

摘要

以汽车离合器的结构与运动理论为依据,结合某车辆的离合器结构参数,在ADAMS虚拟环境平台下建立离合器虚拟样机,对离合器工作过程的平顺性、冲击度、摩擦功等方面进行仿真分析。为离合器的虚拟样机设计、仿真、试验提供一些参考依据。

Abstract

Based on the structure and movement theory of automobile clutch,combined with a clutch structural parameters of a vehicle,a virtual prototype of clutch is built in ADAMS virtual environment platform,and the simulation analysis of the working process of the clutch is carried out,such as ride comfort,impact strength,friction work,etc. Some reference basis for clutch virtual prototype design,simulation and testing is provided.

关键词

离合器虚拟样机技术动力学仿真Adams/view

Keywords

ClutchVirtual prototype technologyDynamics simulationADAMS/view

references

Views

246

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Simulation Analysis and Experimental Research on a Vibration Damping Structure of Cylindrical Spur Gear Slot Holes

Simulation and Analysis of Dynamics of Lower Limb Exoskeleton Rehabilitation Robots

Analysis of the Influence of Clutch Drag Torque on the Efficiency of Hydro-mechanical Continuously Variable Transmission

Structure Design and Kinematics Simulation of a Novel 7-DOF Upper Limb Rehabilitation Exoskeleton Robot

Underactuated Spatial Mechanism of Vehicle Door Latch with Force Constraint

Related Author

No data

Related Institution

Luoyang Keda Gear Transmission Research Institute Co., Ltd.

School of Mechatronics Engineering, Henan University of Science and Technology

School of Mechanical Engineering, Jiamusi University

Harbin Bearing Group Corporation

School of Information and Electronic Technology, Jiamusi University

⁰