Stiffness Analysis of 4-PRP+3-UPS&amp;PU Hybrid Machine Tool with Redundant Actuation

Liu Na; Mei Ying; Chen Jingyao; Liu Xingfang

doi:10.16578/j.issn.1004.2539.2017.09.006

您当前的位置：

首页 >

文章列表页 >

Stiffness Analysis of 4-PRP+3-UPS&PU Hybrid Machine Tool with Redundant Actuation

更新时间：2022-10-20

- Stiffness Analysis of 4-PRP+3-UPS&PU Hybrid Machine Tool with Redundant Actuation
- Vol. 41, Issue 9, Pages: 30-35(2017)
- 作者机构：
  
  1. 中北大学机械与动力工程学院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2017.09.006
  CLC：
扫描看全文
[1]刘娜,梅瑛,陈菁瑶,刘兴芳.冗余驱动4-PRP+3-UPS&PU混联机床静刚度分析[J].机械传动,2017,41(09):30-35.

Liu Na, Mei Ying, Chen Jingyao, et al. Stiffness Analysis of 4-PRP+3-UPS&PU Hybrid Machine Tool with Redundant Actuation. [J]. 41(9):30-35(2017)
[1]刘娜,梅瑛,陈菁瑶,刘兴芳.冗余驱动4-PRP+3-UPS&PU混联机床静刚度分析[J].机械传动,2017,41(09):30-35. DOI： 10.16578/j.issn.1004.2539.2017.09.006.

Liu Na, Mei Ying, Chen Jingyao, et al. Stiffness Analysis of 4-PRP+3-UPS&PU Hybrid Machine Tool with Redundant Actuation. [J]. 41(9):30-35(2017) DOI： 10.16578/j.issn.1004.2539.2017.09.006.

摘要

提出一种6自由度4-PRP+3-UPS&PU冗余驱动混联机床,并对该机床进行静力学及静刚度方面的研究。首先,基于力雅可比矩阵对该机床进行静力学分析,列出静力平衡方程,求解出外力负载与驱动力和支链约束力之间的映射矩阵;其次,分析各驱动分支和约束分支提供的约束力螺旋,计算出各分支在约束力螺旋作用下产生的弹性变形;最后,建立机构刚度模型,对各分支的弹性变形进行叠加,求解出机构的整体柔度矩阵和刚度矩阵。结合数值算例,应用MATLAB进行编程计算得到各驱动分支及动平台的弹性变形随驱动位移的变化曲线。

Abstract

A six degree of freedom 4-PRP+3-UPS&PU redundant hybrid machine tool is proposed,and the statics and static stiffness of the machine tool is studied. Firstly,based on the force Jacobi matrix,the static equilibrium equation is presented,and the mapping matrix between the external load and the driving force and the binding force of the branch is solved. Secondly,the binding screw provided by each drive branch and constraint branch is analyzed,the elastic deformation of each rod under the action of the constraint screw is calculated. Finally,the stiffness model of the mechanism is established,and the elastic deformation of each branch is superposed,and then the overall flexibility and stiffness matrix of the mechanism are obtained. Combined with numerical examples,the MATLAB software is used to calculate the curves of the elastic deformation of each driving and moving platform with the length of the drive rod.

关键词

冗余驱动混联机床约束力螺旋刚度分析

Keywords

Redundant driveHybrid machine toolConstraint wrenchStiffness analysis

references

Views

118

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Dynamics Model of 4-PRP+3-UPS&PU Hybrid Machine Tool with Redundant Drive

Dynamics Analysis of a New Five DOF Hybrid Machine Tool

Performance Analysis of a Five-axis Linkage Hybrid Machine Tool

Simulation of Tyre Stiffness of Marine Pneumatic Friction Clutch

Kinematics Model of a Novel 6-DOF Redundancy Hybrid Machine Tool

Related Author

No data

Related Institution

School of Mechanical Engineering，North University of China

Sichuan Provincial Engineering Laboratory of Super Alloy Cutting Technology

Department of Mechanical and Electronic Engineering， Sichuan Engineering Technical College

School of Mechanical Engineering,University of Shanghai for Science and Technology

No.704,CSIC

⁰

Stiffness Analysis of 4-PRP+3-UPS&PU Hybrid Machine Tool with Redundant Actuation

DOI：10.16578/j.issn.1004.2539.2017.09.006

摘要

Abstract

关键词

Keywords

references