Study on the Numerical Simulation of Hot Rolling Forming Technology of Pinion of Spiral Bevel Gear

Tang Hongyan; Deng Xiaozhong; Gao Zhenshan; Zhang Qingjie

doi:10.16578/j.issn.1004.2539.2017.08.002

您当前的位置：

首页 >

文章列表页 >

Study on the Numerical Simulation of Hot Rolling Forming Technology of Pinion of Spiral Bevel Gear

更新时间：2022-10-20

- Study on the Numerical Simulation of Hot Rolling Forming Technology of Pinion of Spiral Bevel Gear
- Vol. 41, Issue 8, Pages: 7-10(2017)
- 作者机构：
  
  1. 河南科技大学机械装备先进制造河南省协同创新中心
  2. 河南科技大学机电工程学院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2017.08.002
  CLC：
扫描看全文
[1]汤红艳,邓效忠,高振山,张青杰.弧齿锥齿轮小轮热滚轧成形工艺的数值模拟研究[J].机械传动,2017,41(08):7-10+18.

Tang Hongyan, Deng Xiaozhong, Gao Zhenshan, et al. Study on the Numerical Simulation of Hot Rolling Forming Technology of Pinion of Spiral Bevel Gear. [J]. 41(8):7-10(2017)
[1]汤红艳,邓效忠,高振山,张青杰.弧齿锥齿轮小轮热滚轧成形工艺的数值模拟研究[J].机械传动,2017,41(08):7-10+18. DOI： 10.16578/j.issn.1004.2539.2017.08.002.

Tang Hongyan, Deng Xiaozhong, Gao Zhenshan, et al. Study on the Numerical Simulation of Hot Rolling Forming Technology of Pinion of Spiral Bevel Gear. [J]. 41(8):7-10(2017) DOI： 10.16578/j.issn.1004.2539.2017.08.002.

摘要

采用有限元软件DEFORM-3D对弧齿锥齿轮小轮的热滚轧过程进行模拟,并对弧齿锥齿轮小轮热滚轧工艺进行了分析。模拟结果说明,该滚轧成形工艺可行。通过滚轧成形过程中等效应变场、等效应力场、温度场及载荷-行程曲线等物理量场的分析,获得了滚轧成形的工艺参数。

Abstract

The process of hot rolling for the pinion of spiral bevel gear is simulated by using DEFORM-3D and the teeth formed process is analyzed. The simulation results show that the feasibility of rolling forming process. Based on the analysis of the physical field such as equivalent strain field,equivalent stress field,temperature field and the load-stroke curve,the parameters of rolling process are obtained.

关键词

弧齿锥齿轮热滚轧数值模拟物理场

Keywords

Spiral bevel gearHot rollingNumerical simulationPhysical field

references

Views

125

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Modification Design and Experimental Verification of Spiral Bevel Gear Tooth Surface Based on Quantitative Mismatch

Simulation Analysis of Residual Stresses in Spiral Bevel Gear Machining Based on an Oblique Cutting Model

Influence of Error Factors on Transmission Contact for Spiral Bevel Gears

Research on Modal Analysis of the Spiral Bevel Gear System

Predicting Welding Deformation of Exposed Forged-and-welded Gear by the Integrated Computational Approach

Related Author

No data

Related Institution

Zhejiang Tongli Transmission Technology Co., Ltd., Rui'an

Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education, Tianjin University

Department of Mechanical Systems, AECC Commercial Aircraft Engine Co., Ltd.

Citic Heavy Industries Co., Ltd.

State Key Laboratory of Mining Heavy Equipment

⁰