Finite Element Analysis of Contact Fatigue Life of Planetary Reducer

Luo Yu; Luo Yanlei; Guan Chuanbao; Zhao Limei

doi:10.16578/j.issn.1004.2539.2017.04.023

您当前的位置：

首页 >

文章列表页 >

Finite Element Analysis of Contact Fatigue Life of Planetary Reducer

更新时间：2022-10-20

- Finite Element Analysis of Contact Fatigue Life of Planetary Reducer
- Vol. 41, Issue 4, Pages: 106-109(2017)
- 作者机构：
  
  1. 贵州大学机械工程学院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2017.04.023
  CLC：
扫描看全文
[1]罗瑜,罗艳蕾,管传宝,赵丽梅.行星减速装置接触疲劳寿命的有限元分析[J].机械传动,2017,41(04):106-109.

Luo Yu, Luo Yanlei, Guan Chuanbao, et al. Finite Element Analysis of Contact Fatigue Life of Planetary Reducer. [J]. 41(4):106-109(2017)
[1]罗瑜,罗艳蕾,管传宝,赵丽梅.行星减速装置接触疲劳寿命的有限元分析[J].机械传动,2017,41(04):106-109. DOI： 10.16578/j.issn.1004.2539.2017.04.023.

Luo Yu, Luo Yanlei, Guan Chuanbao, et al. Finite Element Analysis of Contact Fatigue Life of Planetary Reducer. [J]. 41(4):106-109(2017) DOI： 10.16578/j.issn.1004.2539.2017.04.023.

摘要

以一款挖掘机用RV行星减速装置为研究对象,采用接触应力理论分析了摆线轮与针齿齿面接触的疲劳强度,结论显示疲劳损伤易出现在摆线轮的齿根处。利用有限元方法对摆线轮与针齿间的应力应变进行了定量分析,结果与理论分析一致,最大应力为736.65 MPa,小于材料的最小许用接触应力,最大应变发生在摆线轮支撑曲轴的轴承孔处。对摆线轮和针齿的材料GCr15的接触疲劳S-N曲线分析可知,两者在啮合工作过程中没有接触疲劳破坏。

Abstract

Taking a RV cycloid planetary reducer used in the excavator as study object. The contact stress theory is adapted to analyze the fatigue strength between the flank of cycloids and pins. The analysis result indicates that the fatigue damage is easy to appear in the root of the cycloid gear. The finite element method is used to quantitative strain and stress analysis between cycloids and pins. The result is consistent to theoretical analysis. The maximum stress is 735. 65 MPa,which is less than the material minimum allowable contact stress.The maximum strain appears at the bearing hole of support crankshaft of the cycloid. Consider that the cycloids and pins are made of GCr15. The analysis of contact fatigue S-N curve of the material GCr15 indicates that there is no contact fatigue failure in the meshing process of the cycloid-pin reducer mechanism.

关键词

RV行星减速疲劳寿命接触应力

Keywords

RV planetary reducerFatigue lifeContact stress

references

Views

186

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

A Verification and Evaluation Method for Top-down Design of Sprag Clutches

Contact Characteristics Analysis of the Internal Meshing Gear Transmission Pair with Double Contact Points

Contact Stress Analysis of Traction Drives of a New Type Bearing Reducer

Study on the Influence of Laminated Coupling Structure-fit Parameters on Fatigue Life and Optimization

Backlash Control and the Fatigue Life Bench Test of Bevel Gears from Inter-axle Differential

Related Author

No data

Related Institution

Jincheng Nanjing Engineering Insitute of Aircraft System, Aviation Industry Corporation of China, Co., Ltd.

College of Mechanical & Electrical Engineering, Nanjing University of Aeronautics and Astronautics

School of Mechatronics and Vehicle Engineering, Chongqing Jiaotong University

State Key Laboratory of Mechanical Transmission, Chongqing University

School of Mechanical Engineering, Tangshan Polytechnic College

⁰