Parameter Optimization of Traffic Cone Recycling Manipulator

Li Yushan; Liu yang; Lü Antao

doi:10.16578/j.issn.1004.2539.2017.04.019

您当前的位置：

首页 >

文章列表页 >

Parameter Optimization of Traffic Cone Recycling Manipulator

更新时间：2022-10-20

- Parameter Optimization of Traffic Cone Recycling Manipulator
- Vol. 41, Issue 4, Pages: 85-88(2017)
- 作者机构：
  
  1. 山东科技大学交通学院
  2. 山东科技大学机械电子工程学院
  3. 山东省交通科学研究院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2017.04.019
  CLC：
扫描看全文
[1]李玉善,刘阳,吕安涛.交通锥回收机械手参数优化[J].机械传动,2017,41(04):85-88.

Li Yushan, Liu yang, Lü Antao. Parameter Optimization of Traffic Cone Recycling Manipulator. [J]. 41(4):85-88(2017)
[1]李玉善,刘阳,吕安涛.交通锥回收机械手参数优化[J].机械传动,2017,41(04):85-88. DOI： 10.16578/j.issn.1004.2539.2017.04.019.

Li Yushan, Liu yang, Lü Antao. Parameter Optimization of Traffic Cone Recycling Manipulator. [J]. 41(4):85-88(2017) DOI： 10.16578/j.issn.1004.2539.2017.04.019.

摘要

针对单自由度齿轮连杆式交通锥回收机械手,在运动学分析的基础上,研究了杆件尺寸、传动比等参数对回收机械手末端执行器速度及轨迹的影响。基于减小所占空间、主臂转角以及水平加速度峰值等优化目标建立了数学模型,利用Matlab软件对主臂转角,主臂、副臂水平夹角及齿轮传动比等参数进行优化。根据优化前后的设计参数,通过ADAMS软件对回收机械手进行了动力学仿真验证,结果表明,优化后回收机械手尺寸减少了10.3%,主臂转角减小了13.6%,水平加速度峰值减小了19.8%。

Abstract

Aiming at a single degree of freedom geared linkage traffic cone recovery manipulator,based on the kinematics analysis,the influence of parameters,likes link size and transmission ratio on the end actuator velocity and trajectory of recovery manipulator is researched. Considering reducing occupation space,main arm rotation angle and peak horizontal acceleration as the optimization targets,the mathematical model is established. By using MATLAB,the main arm rotation angle,main arm,deputy arm horizontal angle and gear transmission ratio are optimized. According to the design parameters before and after optimization,the dynamics simulation verification of the recycling manipulator is carried out by ADAMS. The result shows that,the optimization of the size of recovery manipulator is reduced by 10. 3%,main arm rotation angle decreased by 13. 6%,the peak horizontal acceleration is reduced by 19. 8%.

关键词

交通锥回收机械手参数优化运动轨迹仿真分析

Keywords

Traffic cone recycling manipulatorParameter optimizationMotion trailSimulation analysis

references

Views

114

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Tooth Profile Modification and Experimental Study of Double Circular Arc Flexsplines in Harmonic Reducers

Optimum Design and Research of the Vertical Manipulator Arm Rotation Structure

Design and Research of an Eight-bar Back Lifting Mechanism with Single Degree of Freedom

Research and Test of X-wing Flapping-wing Mechanism Based on the Crank Slider Mechanism

Antiskid Design Method and Simulation Optimization of Rope Rail Conveyors

Related Author

No data

Related Institution

Zhejiang Provincial Key Lab of Part Rolling Technology, Ningbo University

Ningbo Zhongda Leader Intelligent Transmission Co., Ltd.

School of Construction Machinery, Shandong Jiaotong University, Ji'nan

Shandong Tianyi Machinery Co., Ltd., Ji'ning

School of Mechanical Engineering, Jiangsu University of Technology

⁰