Study on the Crack Propagation Life of the High-speed Train Gear

Li Gang; Li Xiuhong; Ren Jiajun; Qin Xiaofeng; Pang Yinming

doi:10.16578/j.issn.1004.2539.2017.02.004

您当前的位置：

首页 >

文章列表页 >

Study on the Crack Propagation Life of the High-speed Train Gear

更新时间：2022-10-20

- Study on the Crack Propagation Life of the High-speed Train Gear
- Vol. 41, Issue 2, Pages: 17-21(2017)
- 作者机构：
  
  1. 太原理工大学机械工程学院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2017.02.004
  CLC：
扫描看全文
[1]李刚,李秀红,任家骏,秦晓峰,庞荫铭.高速列车齿轮副裂纹扩展寿命研究[J].机械传动,2017,41(02):17-21.

Li Gang, Li Xiuhong, Ren Jiajun, et al. Study on the Crack Propagation Life of the High-speed Train Gear. [J]. 41(2):17-21(2017)
[1]李刚,李秀红,任家骏,秦晓峰,庞荫铭.高速列车齿轮副裂纹扩展寿命研究[J].机械传动,2017,41(02):17-21. DOI： 10.16578/j.issn.1004.2539.2017.02.004.

Li Gang, Li Xiuhong, Ren Jiajun, et al. Study on the Crack Propagation Life of the High-speed Train Gear. [J]. 41(2):17-21(2017) DOI： 10.16578/j.issn.1004.2539.2017.02.004.

摘要

为研究高速列车齿轮的齿根裂纹扩展特性,在有限元软件ABAQUS中建立齿轮副模型并通过静力学分析,以确定裂纹萌生位置。基于线弹性断裂力学理论,在软件ABAQUS中建立含齿根初始裂纹的斜齿轮模型,计算裂纹前缘不同节点处的应力强度因子;研究齿根裂纹自动扩展的方式及轨迹,通过计算得到齿根裂纹的扩展寿命。在此研究的基础上,探讨了载荷大小等因素对裂纹扩展寿命及轨迹的影响规律。研究表明,裂纹扩展速率先慢后快,载荷对裂纹扩展寿命的影响十分明显。

Abstract

The crack propagation characteristic property of the high-speed train gears is researched,the location of crack initiation is determined by a statics analysis and building gear pair model in the ABAQUS software.A finite element model of helical gear pair with crack at tooth root is established by ABAQUS software,then the stress intensity factor of the different nodes of crack tip is calculated based on the theory of linear elastic fracture mechanics.Then,the way and the growth trajectory of the crack is studied,the propagation life of the crack at tooth root are obtained by calculation.Based on the obtained result,the influence of load magnitude and other factors on the crack propagation life is discussed.The study indicate that the crack expands slowly at first and then faster and faster,the influence of load magnitude on the crack propagation life is obvious.

关键词

斜齿轮裂纹扩展寿命预测有限元法

Keywords

Helical gearCrack propagationLife predictionFinite element method

references

Views

227

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Time Varying Meshing Stiffness Analysis and Experimental Study of Fatigue Pitting Helical Gear based on Finite Element Method

Numerical Calculation of Stress Intensity Factor of Tooth Root Crack in the High-speed EMU Gear

Crack Propagation Simulation and Meshing Stiffness Analysis of Disposable Harmonic Gears

Contact Analysis of Sprag-type Overrunning Clutches

Numerical Optimization Method and Experimental Verification of Contact Strength of U-Joint Bearings

Related Author

No data

Related Institution

Tianjin Key Laboratory of Power Transmission and Safety Technology for New Energy Vehicles

College of Mechanical Engineering,Taiyuan University of Technology

School of Mechatronics Engineering, Harbin Institute of Technology

Nanjing Research Institute on Simulation Technique

Wanxiang Qianchao Co., Ltd.

⁰