Contact Analysis of Cylindrical Helical Gear Considering the Hob Installation Error

Zhang Rui; Wu Zhifei; Wang Tie; Yan Tianxiao; Wu Pingan; Qiao Jinwei

doi:10.16578/j.issn.1004.2539.2016.12.013

您当前的位置：

首页 >

文章列表页 >

Contact Analysis of Cylindrical Helical Gear Considering the Hob Installation Error

更新时间：2022-10-20

- Contact Analysis of Cylindrical Helical Gear Considering the Hob Installation Error
- Vol. 40, Issue 12, Pages: 61-64(2016)
- 作者机构：
  
  1. 太原理工大学齿轮研究所
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2016.12.013
  CLC：
扫描看全文
[1]张瑞,武志斐,王铁,颜天晓,吴平安,乔金维.考虑滚刀安装误差的圆柱斜齿轮接触分析[J].机械传动,2016,40(12):61-64+95.

Zhang Rui, Wu Zhifei, Wang Tie, et al. Contact Analysis of Cylindrical Helical Gear Considering the Hob Installation Error. [J]. 40(12):61-64(2016)
[1]张瑞,武志斐,王铁,颜天晓,吴平安,乔金维.考虑滚刀安装误差的圆柱斜齿轮接触分析[J].机械传动,2016,40(12):61-64+95. DOI： 10.16578/j.issn.1004.2539.2016.12.013.

Zhang Rui, Wu Zhifei, Wang Tie, et al. Contact Analysis of Cylindrical Helical Gear Considering the Hob Installation Error. [J]. 40(12):61-64(2016) DOI： 10.16578/j.issn.1004.2539.2016.12.013.

摘要

高精度齿轮加工必须考虑加工误差对啮合质量的影响。根据齿轮接触分析基本原理,利用Matlab软件实现了渐开线圆柱斜齿轮的接触仿真,得到齿面接触迹线和传动误差曲线。通过对比不同滚刀安装误差下的齿轮传动误差曲线,进行了传动误差对不同安装误差的敏感性分析。通过该研究方法将滚刀安装误差与齿轮啮合质量联系起来,可为后续的精加工提供依据。

Abstract

The high precision gear processing must consider the influence of machining error on the meshing quality,based on the basic principle of the contact analysis of helical gear,the simulation of involute helical gear is realized by using the Matlab software,then tooth contact trace and the transmission error cure is obtained. By comparing the gear transmission error curve under different hob installation error,the sensitivity of the transmission error on different hob installation error is analyzed. The gear mesh quality will be connected with the hob installation error by the research methods of this article,which will provide the basis for subsequent finishing.

关键词

传动误差齿面接触分析加工误差斜齿轮

Keywords

Transmission errorTooth contact analysisMachining errorHelical gear

references

Views

121

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Optimization of Contact Path and Transmission Error based on Installation and Adjustment of Spiral Bevel Gear

Topological Modification of a Helical Gear with Circular Tooth Profile in Gear Cutter and Tooth Drum-shaped

Design Method of Tooth Profile based on Transmission Error Feedback

Research on Gear Modification and Simulation of Hybrid Transmission

Structure Design and Simulation Analysis of the Dynamic Inspection Instrument for Middle and Large Worm Gear Pairs

Related Author

No data

Related Institution

Shaanxi Key Laboratory of Gear Transmission，Shaanxi Fast Gear Co.，Ltd.

College of Mechanical and Vehicle Engineering，Hunan University

School of Mechanical Engineering, Northwestern Polytechnical University

School of Mechanical Engiineering,University of Shanghai for Science and Technology

College of Intelligent Manufacturing, Fujian Polytechnic of Information Technology

⁰