Improvement and Optimization of the Structure of the Driving Drum based on ANSYS

Yu Yuzhen; Wang Fei; Dong Xiaolei; Li Li; Liu Liwei

doi:10.16578/j.issn.1004.2539.2016.06.018

您当前的位置：

首页 >

文章列表页 >

Improvement and Optimization of the Structure of the Driving Drum based on ANSYS

更新时间：2022-10-20

- Improvement and Optimization of the Structure of the Driving Drum based on ANSYS
- Vol. 40, Issue 6, Pages: 86-89(2016)
- 作者机构：
  
  1. 华北理工大学机械工程学院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2016.06.018
  CLC：
扫描看全文
[1]于玉真,王飞,董小雷,李励,刘立伟.基于ANSYS传动滚筒的结构改进及优化[J].机械传动,2016,40(06):86-89.

Yu Yuzhen, Wang Fei, Dong Xiaolei, et al. Improvement and Optimization of the Structure of the Driving Drum based on ANSYS. [J]. 40(6):86-89(2016)
[1]于玉真,王飞,董小雷,李励,刘立伟.基于ANSYS传动滚筒的结构改进及优化[J].机械传动,2016,40(06):86-89. DOI： 10.16578/j.issn.1004.2539.2016.06.018.

Yu Yuzhen, Wang Fei, Dong Xiaolei, et al. Improvement and Optimization of the Structure of the Driving Drum based on ANSYS. [J]. 40(6):86-89(2016) DOI： 10.16578/j.issn.1004.2539.2016.06.018.

摘要

用有限元软件ANSYS对带式输送机的传动滚筒进行有限元分析,得到传动滚筒的应力和变形情况。根据该结果对传动滚筒的结构进行重新设计和轻量化研究,并对轻量化结果进行了验证。最后利用ANSYS Workbench的优化设计模块对滚筒结构进行了多目标优化,为传动滚筒结构的优化和改进提供了理论依据。

Abstract

The finite element analysis software ANSYS is applied to conduct the finite element analysis of the driving drum,and the stress and deformation conditions are obtained. According to the result,the structure redesign and lightweight research of the driving drum are carried out,and the lightweight results are verified.Finally,the multi-objective optimization design of the driving drum is carried out by using optimization module of ANSYS Workbench,which provides a theoretical basis for the optimization and improvement of the driving drum structure.

关键词

传动滚筒结构设计多目标优化

Keywords

Driving drumStructureDesignMulti-objective optimization

references

Views

270

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design and Experiment of a Multi-mode Gripper

Multi-objective Optimization of the NN Type Transmission with Small Tooth Difference

Improvement on Processing Technology of Thin Plate Gears

Response Surface Optimization of Flexspline based on Parameter Sensitivity

Multi-objective Optimization Design of Planetary Cycloidal Reducer Structure with Considering Failure Correlation

Related Author

No data

Related Institution

Hubei Key Collaborative Innovation Center for Automotive Components Technology

Hubei Key Laboratory of Advanced Technology for Automotive Components

School of Automotive Engineering, Wuhan University of Technology

Nuclear Power Institute of China

Nanjing Engineering Institute of Aircraft System

⁰