Research of the Vibration Performance of Driving Gear Bearing Mounting Distance based on ADAMS

Huang Fengyun; Zhou Zihan; Zhu Jianguo; Li Pengkai; Xu Wei

doi:10.16578/j.issn.1004.2539.2016.06.009

您当前的位置：

首页 >

文章列表页 >

Research of the Vibration Performance of Driving Gear Bearing Mounting Distance based on ADAMS

更新时间：2022-10-20

- Research of the Vibration Performance of Driving Gear Bearing Mounting Distance based on ADAMS
- Vol. 40, Issue 6, Pages: 42-46(2016)
- 作者机构：
  
  1. 武汉理工大学机电工程学院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2016.06.009
  CLC：
扫描看全文
[1]黄丰云,周子寒,朱建国,李鹏凯,徐维.基于ADAMS的主动齿轮轴承安装距的振动性能研究[J].机械传动,2016,40(06):42-46.

Huang Fengyun, Zhou Zihan, Zhu Jianguo, et al. Research of the Vibration Performance of Driving Gear Bearing Mounting Distance based on ADAMS. [J]. 40(6):42-46(2016)
[1]黄丰云,周子寒,朱建国,李鹏凯,徐维.基于ADAMS的主动齿轮轴承安装距的振动性能研究[J].机械传动,2016,40(06):42-46. DOI： 10.16578/j.issn.1004.2539.2016.06.009.

Huang Fengyun, Zhou Zihan, Zhu Jianguo, et al. Research of the Vibration Performance of Driving Gear Bearing Mounting Distance based on ADAMS. [J]. 40(6):42-46(2016) DOI： 10.16578/j.issn.1004.2539.2016.06.009.

摘要

以某微车后桥主减速器主、被动齿轴承安装距引起后桥振动为研究对象,为了优化主、被动齿轴承安装距对振动噪声的影响和提高主、被动齿轴承使用寿命。通过三维建模和ADAMS动力学仿真,将不同安装距在不同转速下分别进行仿真分析,得到最佳安装距,并通过试验验证了在该安装距下,主减速器减振降噪得到很大的改善,而且轴承寿命也得到很大的提高,同时也为该微车主减速器的结构设计和减振降噪提供方法指导。

Abstract

Taking the vibration of rear axle caused by bearing mounting distance of a mini car rear axle main reducer driving gear and driven gear as the research object,in order to optimize the impact of the bearing mounting distance of driving gear and driven gear on the vibration noise,and improve the service life of the bearing of the driving gear and driven gear. The different mounting distance at different speeds are analyzed by simulation respectively by 3D modeling and ADAMS dynamics simulation,the optimal installation distance is obtained,and through the test on the mounting distance,the vibration and noise reduction of the main reducer are greatly improved,and the bearing life is greatly improved. At the same time,it can provide a certain method guidance for the structure design and the vibration and noise of the main reducer of the mini car.

关键词

安装距Adams轴承寿命减振降噪

Keywords

Mounting distanceAdamsBearing lifeNoise and vibration reduction

references

Views

226

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research and Simulation of Cornering Characteristics on Oil and Gas Pipeline Robots

Kinematic and Dynamic Analysis of an Eight-bar Mechanism in Carton Forming

Design and Analysis of the Driving Mechanism of Multi-DOF Flapping Wing Aircrafts

Design and Analysis of Closed-Linked Eight-Link Foot Robot with Composite Hinges

A Kind of Robot Structure Design and Kinematics Analysis

Related Author

No data

Related Institution

Wuhan Qinling Lingke Aviation Power System Co., Ltd.

School of Mechanical and Electrical Engineering, Hubei Green Chemical Equipment Engineering Technology;Research Center of Wuhan Institute of Technology

School of Mechanical Engineering，Hubei University of Technology

College of Mechanical and Electrical Engineering，Henan University of Science and Technology

Department of mechanical engineering，Shanxi Institute of Mechanical and Electrical Engineering

⁰