Dynamics Analysis of Needle Rod Mechanism of Tufting Carpet Machine based on ADAMS

Li Dinglin; Xu Yang

doi:10.16578/j.issn.1004.2539.2016.02.023

您当前的位置：

首页 >

文章列表页 >

Dynamics Analysis of Needle Rod Mechanism of Tufting Carpet Machine based on ADAMS

更新时间：2022-10-20

- Dynamics Analysis of Needle Rod Mechanism of Tufting Carpet Machine based on ADAMS
- Vol. 40, Issue 2, Pages: 100-103(2016)
- 作者机构：
  
  1. 东华大学机械工程学院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2016.02.023
  CLC：
扫描看全文
[1]李丁霖,徐洋.基于ADAMS的簇绒地毯机针连杆机构动力学分析[J].机械传动,2016,40(02):100-103.

Li Dinglin, Xu Yang. Dynamics Analysis of Needle Rod Mechanism of Tufting Carpet Machine based on ADAMS. [J]. 40(2):100-103(2016)
[1]李丁霖,徐洋.基于ADAMS的簇绒地毯机针连杆机构动力学分析[J].机械传动,2016,40(02):100-103. DOI： 10.16578/j.issn.1004.2539.2016.02.023.

Li Dinglin, Xu Yang. Dynamics Analysis of Needle Rod Mechanism of Tufting Carpet Machine based on ADAMS. [J]. 40(2):100-103(2016) DOI： 10.16578/j.issn.1004.2539.2016.02.023.

摘要

簇绒地毯机具有多套连杆机构,连杆机构运动状况直接影响织布的质量及织机的工作效率。以簇绒地毯机针连杆机构为研究对象,采用ADAMS仿真软件对簇绒地毯织机针连杆机构建立简易模型,并进行动力学仿真分析,得到簇绒针连杆机构各铰接点处的支反力、工作阻碍力矩和作用在曲柄上的平衡力矩曲线图,并与实验数据进行数值分析得到的曲线图进行对比,验证了动力学仿真分析的正确性,并为簇绒针连杆机构的优化设计提供了依据。

Abstract

The tufting carpet machine has multiple sets of linkage mechanism,and the movement of the linkage mechanism directly affect the quality of the weaving and efficiency of the loom. Taking the needle rod mechanism of tufting carpet machine as the research object,by using ADAMS simulation software,a simple model of tufting carpet machine needle rod mechanism is built and the dynamics simulation analysis is carried out. The diagram of reaction of supports,working retard moment and the balance torque on the crank of each connection point on the crank- rocker mechanism of the tufting needle rod mechanism is obtained. And comparing with the diagram of experimental data which is by numerical analysis that to verify the correctness of the dynamic simulation analysis,and a basis for the optimization design of tufting needle rod mechanism is provided.

关键词

Adams动力学仿真曲柄摇杆机构数值分析

Keywords

AdamsDynamics simulationCrank-rocker mechanismNumerical analysis

references

Views

217

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Dynamics Simulation Analysis of a New Type of Lightweight Bridge Crane Reducer

Study on the Influence of Different Structure Cranks on the Dynamic Balancing of Crank-group Driving Mechanism

Analysis of the Dynamic Characteristic of Forklift Gearbox based on ADAMS

Dynamics Simulation Analysis of the Slewing Gear Meshing of Anti-radiation Hydraulic Excavator

Dynamic Simulation Analysis of the Revolution of Secondary Reduction Gear based on ADAMS

Related Author

No data

Related Institution

School of Mechatronics Engineering, Henan University of Science and Technology

Research and Development Center,Zhengzhou Research Institute of Mechanical Engineering Co.,Ltd.

Xi’an Aeronautical Polytechnic Institute

Shaanxi University of Science & Technology

Xi’an Jiaotong University

⁰