Simulation Analysis and Modeling of New Type Cam Mechanism based on Pro / E and ADAMS

He Haiqin; Li Yanping; Chang Yong

doi:10.16578/j.issn.1004.2539.2016.02.020

您当前的位置：

首页 >

文章列表页 >

Simulation Analysis and Modeling of New Type Cam Mechanism based on Pro / E and ADAMS

更新时间：2022-10-20

- Simulation Analysis and Modeling of New Type Cam Mechanism based on Pro / E and ADAMS
- Vol. 40, Issue 2, Pages: 88-90(2016)
- 作者机构：
  
  1. 集美大学机械与能源工程学院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2016.02.020
  CLC：
扫描看全文
[1]何海琴,李延平,常勇.基于Pro/E和ADAMS的新型凸轮机构建模及仿真分析[J].机械传动,2016,40(02):88-90.

He Haiqin, Li Yanping, Chang Yong. Simulation Analysis and Modeling of New Type Cam Mechanism based on Pro / E and ADAMS. [J]. 40(2):88-90(2016)
[1]何海琴,李延平,常勇.基于Pro/E和ADAMS的新型凸轮机构建模及仿真分析[J].机械传动,2016,40(02):88-90. DOI： 10.16578/j.issn.1004.2539.2016.02.020.

He Haiqin, Li Yanping, Chang Yong. Simulation Analysis and Modeling of New Type Cam Mechanism based on Pro / E and ADAMS. [J]. 40(2):88-90(2016) DOI： 10.16578/j.issn.1004.2539.2016.02.020.

摘要

采用Pro/E和ADAMS完成了新型负半径滚子直动推杆盘形凸轮机构虚拟样机建模,应用ADAMS/Flex模块对滚子推杆从动件柔性化处理,建立刚柔耦合模型,得出柔性从动件输出响应运动规律曲线。通过柔性从动件输出响应与刚性从动件输出响应的对比,直观反映出柔性从动件相对于刚性从动件运动规律的偏差。

Abstract

The virtual prototyping modeling of new typed disc cam mechanism with straight moving negative radius roller follower is created by using Pro / E and ADAMS. The flexibility treatment to roller follower is carried out by using the ADAMS / Flex module and the rigid- flexible coupled model is built,the output response motion curve of flexible follower is obtained. Comparing the output response of flexible follower with rigid follower,it directly reflects the deviation of the motion rule.

关键词

Adams凸轮机构柔性化耦合模型输出响应

Keywords

AdamsCam mechanismFlexibilityCoupled modelOutput response

references

Views

359

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research and Simulation of Cornering Characteristics on Oil and Gas Pipeline Robots

Kinematic and Dynamic Analysis of an Eight-bar Mechanism in Carton Forming

Design and Analysis of the Driving Mechanism of Multi-DOF Flapping Wing Aircrafts

Design and Analysis of Closed-Linked Eight-Link Foot Robot with Composite Hinges

A Kind of Robot Structure Design and Kinematics Analysis

Related Author

No data

Related Institution

Wuhan Qinling Lingke Aviation Power System Co., Ltd.

School of Mechanical and Electrical Engineering, Hubei Green Chemical Equipment Engineering Technology;Research Center of Wuhan Institute of Technology

School of Mechanical Engineering，Hubei University of Technology

College of Mechanical and Electrical Engineering，Henan University of Science and Technology

Department of mechanical engineering，Shanxi Institute of Mechanical and Electrical Engineering

⁰