Based on the principle of cycloidal pin gear planetary transmission,a new type of coaxial single input and ipsilateral double output cycloid speed reducer is presented. The working principle of the reducer is discussed and the transmission structure is analyzed,with the transformation mechanism method,its transmission ratio formula is deduced. The motion response of the output shaft of the reducer and the stress change rule of the key parts are simulated by using ADAMS software. The transmission ratio which gets from the simulation is compared with the one of the theoretical calculation,which verifies the feasibility of the transmission principle of the reducer. The two output shaft of the reducer can realize the coaxial positive and negative output transmission and the transmission ratio can be designed independent,especially suitable for the double- screw coaxial transmission of mixer,aircrafts,ships and submarines.
Research and Simulation of Cornering Characteristics on Oil and Gas Pipeline Robots
Kinematic and Dynamic Analysis of an Eight-bar Mechanism in Carton Forming
Design and Analysis of the Driving Mechanism of Multi-DOF Flapping Wing Aircrafts
Design and Analysis of Closed-Linked Eight-Link Foot Robot with Composite Hinges
A Kind of Robot Structure Design and Kinematics Analysis
Related Author
No data
Related Institution
Wuhan Qinling Lingke Aviation Power System Co., Ltd.
School of Mechanical and Electrical Engineering, Hubei Green Chemical Equipment Engineering Technology;Research Center of Wuhan Institute of Technology
School of Mechanical Engineering,Hubei University of Technology
College of Mechanical and Electrical Engineering,Henan University of Science and Technology
Department of mechanical engineering,Shanxi Institute of Mechanical and Electrical Engineering