Contrast Experimental Study on the Bending Fatigue Life of Modification Gear

Yan Tianxiao; Zhang Ruiliang; Wang Tie; Liu Yaqiong; Shi Ruonan; Jiang Xiongfei

doi:10.16578/j.issn.1004.2539.2016.01.025

您当前的位置：

首页 >

文章列表页 >

Contrast Experimental Study on the Bending Fatigue Life of Modification Gear

更新时间：2022-10-20

- Contrast Experimental Study on the Bending Fatigue Life of Modification Gear
- Vol. 40, Issue 1, Pages: 110-112(2016)
- 作者机构：
  
  1. 太原理工大学齿轮研究所
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2016.01.025
  CLC：
扫描看全文
[1]颜天晓,张瑞亮,王铁,刘亚琼,史若男,姜雄飞.修形齿轮弯曲疲劳寿命对比试验研究[J].机械传动,2016,40(01):110-112+131.

Yan Tianxiao, Zhang Ruiliang, Wang Tie, et al. Contrast Experimental Study on the Bending Fatigue Life of Modification Gear. [J]. 40(1):110-112(2016)
[1]颜天晓,张瑞亮,王铁,刘亚琼,史若男,姜雄飞.修形齿轮弯曲疲劳寿命对比试验研究[J].机械传动,2016,40(01):110-112+131. DOI： 10.16578/j.issn.1004.2539.2016.01.025.

Yan Tianxiao, Zhang Ruiliang, Wang Tie, et al. Contrast Experimental Study on the Bending Fatigue Life of Modification Gear. [J]. 40(1):110-112(2016) DOI： 10.16578/j.issn.1004.2539.2016.01.025.

摘要

为探究修形参数对齿轮疲劳特性的影响,采用罗卡提法进行齿轮疲劳特性对比试验。试验采用错齿啮合方案,利用Romax确定了试验载荷相应的弯曲应力,并用Matlab对试验数据进行了处理分析,得到不同修形参数下的齿轮弯曲疲劳强度。试验结果表明,在给定工况下,选择合适的齿顶修形能够提高齿轮的弯曲疲劳寿命,为修形方法在齿轮中的应用提供了基础数据参考。

Abstract

The Locati method is used to explore the influence of modification parameters on the fatigue property of gears. The corresponding bending stress of meshing gear with staggering tooth is obtained by using the Romax software,then the bending fatigue strength for gears with different modification parameters are obtained according to experimental data by using Matlab. The results show that the appropriate addendum modification can improve the bending fatigue life of gear with the given conditions,which provides the basic reference data for modification in the application of gear.

关键词

齿轮修形弯曲疲劳

Keywords

GearModificationBending fatigue

references

Views

290

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experimental Study on Bending Stress of Spur Gear with Tooth Profile Modification and Finite Element Verification

Contrast Experimental Study on the Dynamic Characteristic of Modification Gear

Study on Tooth Surface Roughness Modeling of Form Grinding Considering the Change of the Local Grinding Condition

Research on Loaded Transmission Error of Internal Short Tooth Spur Gears

Research Status of Initiation and Expansion Behavior of Gear Fatigue Cracks

Related Author

No data

Related Institution

State Key Laboratory of High Performance Complex Manufacturing, Central South University

AECC ZhongChuan Transmission Machinery Co., Ltd.

State Key Laboratory of High-Performance Complex Manufacturing, Central South University

The Research Institute of CSIC

School of Mechanical Engineering, Northwestern Polytechnical University, Xi´an

⁰