Cutting Tooth Kinematic Simulation and Virtual Prototype of EBH300A Roadheader

Huang Jiannong; Bai Long; Dong Zhifeng

doi:10.16578/j.issn.1004.2539.2015.05.002

您当前的位置：

首页 >

文章列表页 >

Cutting Tooth Kinematic Simulation and Virtual Prototype of EBH300A Roadheader

更新时间：2022-10-20

- Cutting Tooth Kinematic Simulation and Virtual Prototype of EBH300A Roadheader
- Vol. 39, Issue 5, Pages: 120-123(2015)
- 作者机构：
  
  1. 中国矿业大学(北京)机电与信息工程学院
  2. 石家庄煤矿机械有限责任公司
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2015.05.002
  CLC：
扫描看全文
[1]黄建农,白龙,董志峰.EBH300A型掘进机虚拟样机及截齿运动仿真[J].机械传动,2015,39(05):120-123.

Huang Jiannong, Bai Long, Dong Zhifeng. Cutting Tooth Kinematic Simulation and Virtual Prototype of EBH300A Roadheader. [J]. 39(5):120-123(2015)
[1]黄建农,白龙,董志峰.EBH300A型掘进机虚拟样机及截齿运动仿真[J].机械传动,2015,39(05):120-123. DOI： 10.16578/j.issn.1004.2539.2015.05.002.

Huang Jiannong, Bai Long, Dong Zhifeng. Cutting Tooth Kinematic Simulation and Virtual Prototype of EBH300A Roadheader. [J]. 39(5):120-123(2015) DOI： 10.16578/j.issn.1004.2539.2015.05.002.

摘要

为实现EBH300A悬臂式掘进机截割、破岩遥控、智能记忆截割成形等功能,需要研究该掘进机在工作过程中截齿的运动学特性及规律。根据EBH300（A）悬臂式掘进机工程样机设计,利用三维设计软件Pro/E软件建立其三维实体模型及虚拟样机。应用机械系统动力学分析软件ADAMS,根据实际运动参数,对EBH300A悬臂式掘进机工作位姿其运动过程进行了仿真,得出了掘进机截割头上截齿的运动位移、速度以及加速度的时间历程。

Abstract

In order to realize the functions of remote control cutting coal and rock,and intelligent remember shaping,it is necessary to study the kinematic characteristics of cutting tooth of EBH300 A roadheader during operation.According to the engineering design of EBH300 Aroadheader prototype,the 3Dsolid model and virtual prototype are built with Pro/E software.The mechanical system dynamic analysis software is used to simulate the displacement,movement based on the parameters of the EBH300 Aroadheader,in which,the motion displacement,velocity and acceleration of cutting tooth on the cutting head are provided.

关键词

掘进机三维建模虚拟样机截齿运动仿真

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Kinematics Analysis of Working Devices of Wheel Loader based on Homogeneous Coordinate Transformation

Conjugate Tooth Profile Solving and Movement Interference Inspection of Harmonic Type Gear Pump

Developed of the New Eight-legged Walking Bionic Robot

3D Parametric Solid Modeling of Cylindrical Indexing Cam based on VB 6.0 and Pro/E

Research of the Reachable Workspace of Symmetrical Planar 3-RRR Parallel Mechanism

Related Author

No data

Related Institution

Ministry of Education) ,Southwest University of Science and Technology

School of Mechanical Engineering, Changzhou University

Key Laboratory of Testing Technology for Manufacturing Process of Ministry of Education,Southwest University of Science and Technology

Shaanxi University of Science & Technology

School of Mechanical and Power Engineering,North University of China

⁰