Structure Strength Analysis for the Box of One Power Take-off

Zhang Wenbo; He Lin; Jiang Hongwan

doi:10.16578/j.issn.1004.2539.2015.04.030

您当前的位置：

首页 >

文章列表页 >

Structure Strength Analysis for the Box of One Power Take-off

更新时间：2022-10-20

- Structure Strength Analysis for the Box of One Power Take-off
- Vol. 39, Issue 4, Pages: 136-138(2015)
- 作者机构：
  
  1. 贵州大学机械工程学院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2015.04.030
  CLC：
扫描看全文
[1]张文博,何林,蒋宏婉.某型取力器箱体结构强度分析[J].机械传动,2015,39(04):136-138+154.

Zhang Wenbo, He Lin, Jiang Hongwan. Structure Strength Analysis for the Box of One Power Take-off. [J]. 39(4):136-138(2015)
[1]张文博,何林,蒋宏婉.某型取力器箱体结构强度分析[J].机械传动,2015,39(04):136-138+154. DOI： 10.16578/j.issn.1004.2539.2015.04.030.

Zhang Wenbo, He Lin, Jiang Hongwan. Structure Strength Analysis for the Box of One Power Take-off. [J]. 39(4):136-138(2015) DOI： 10.16578/j.issn.1004.2539.2015.04.030.

摘要

以取力器箱体为主要研究对象,采用CAD软件UG建立箱体、齿轮、轴等三维实体模型,通过数据交换接口导入到有限元分析软件ANSYS Workbench中,并对箱体分别进行静、动力学分析,得到了箱体的应力分布,将不同分析结果进行对比,进而为准确分析箱体的结构强度和可靠性优化设计提供理论依据。

Abstract

Taking the box of power take-off as the main research object,the box,gear,axis and other three-dimensional entity model are created by using the CAD software UG,and the models are inputted into ANSYS Workbench through the data exchange interface and respectively taken statics analysis and dynamics analysis of the box to obtain the box stress distribution.Then,it provides theoretical basis for accurate structure strength analysis and reliable optimizing design of the box through comparing different analysis results.

关键词

取力器箱体有限元动力学

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Overview of Crown Gear Coupling Design Technologies

Meshing Characteristic Analysis of the Gear Rack Drilling Rig Hoisting System

Study on the Operating Performance of Gear System based on Size Effect

Vibration Analysis and Topology Optimization of Gearbox of Electric Vehicle

Analysis and Design for 3-RPRR Similarly Planar Fully Compliant Parallel Manipulator

Related Author

No data

Related Institution

School of Mechanical Engineering, Northwestern Polytechnical University

Hebei Huagang Design & Reseach Institute Co.,Ltd.

School of Mechanical Science and Engineering,Northeast Petroleum University

Mechanical and Electrical Engineering College,Xinxiang University

School of Automotive Studies,Tongji University

⁰