Research of the Fatigue Characteristic of V-ribbed Belt

Li Guojun

doi:10.16578/j.issn.1004.2539.2015.04.018

您当前的位置：

首页 >

文章列表页 >

Research of the Fatigue Characteristic of V-ribbed Belt

更新时间：2022-10-20

- Research of the Fatigue Characteristic of V-ribbed Belt
- Vol. 39, Issue 4, Pages: 40-43(2015)
- 作者机构：
  
  1. 贵州理工学院机械工程学院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2015.04.018
  CLC：
扫描看全文
[1]李国俊.多楔带疲劳特性研究[J].机械传动,2015,39(04):40-43.

Li Guojun. Research of the Fatigue Characteristic of V-ribbed Belt. [J]. 39(4):40-43(2015)
[1]李国俊.多楔带疲劳特性研究[J].机械传动,2015,39(04):40-43. DOI： 10.16578/j.issn.1004.2539.2015.04.018.

Li Guojun. Research of the Fatigue Characteristic of V-ribbed Belt. [J]. 39(4):40-43(2015) DOI： 10.16578/j.issn.1004.2539.2015.04.018.

摘要

针对带传动过程中,带容易发生疲劳失效及断裂等问题,以带传动系统中的多楔带为研究对象,通过实验获得多楔带橡胶的物理特性,并将实验得到的材料特性代入有限元分析软件ABAQUS中,对多楔带疲劳特性进行仿真分析。分析结果表明,随着加载载荷的增加,多楔带单位长度抗拉力不断增大而循环次数则不断减小,随着初始裂纹尺寸的增加,多楔带单位长度抗拉力也不断增大且增加率却不断减小,而循环次数呈现先缓慢减小后急剧减小的趋势;随着位移的增加,多楔带单位长度抗拉力不断增大,而循环次数却不断减小。

Abstract

To the problems of the belt is easy to produce such as fatigue failure and fracture in belt transmission process,with the V-ribbed belt of belt drive system as research object,the V-ribbed belt rubber physical properties is got by the experiment,and the material characteristic getting from the experimental is substituted into the ABAQUS of finite element analysis software to carry out the simulation analysis on the fatigue characteristic of V-ribbed belt.The analysis results show that with the increase of the load,the unit length tensile resistance of V-ribbed belt is increasing and the cycles index are decreases,and with the increase of initial crack size,the unit length tensile resistance of v-ribbed belt is increasing and the increasing rate is reduced,and the cycles index display the trends of first slowly decreases then sharply reduced.With the increase of displacement,the unit length tensile resistance of v-ribbed belt is increasing,and the cycles index are reduced.

关键词

多契带疲劳有限元分析

Keywords

references

Views

103

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Analysis and Laser Remanufacturing of the Slewing Ring Gear Tooth Broken of the Reclaimer

Type Selection and Fatigue Analysis of the Lifting Mechanism used in the Embedded Type Stereo Carport

Finite Element Analysis of Excavator Driving Axle Housing under the Multi Work Condition

Finite Element Analysis of the Box Structure of Light High-speed Marine Gearbox

Structure Design of the Force Testing Central Support of a Transonic and Supersonic Wind Tunnel

Related Author

No data

Related Institution

The NO.6 Branch Company of Qinhuangdao Port Co.,Ltd.

Hebei Vocational & Technical College of Building Materials

Inner Mongolia Datang International Xilinhaote Mining Co.,Ltd.

College of Mechanical Engineering,Liaoning Technical University

Nanyang Radio & Television University

⁰