Optimal Design of the Linkage Mechanism Simulation of Three-Roller Guiding Device

Zhang Yiwei; Yang Wei; Tang Ligang

doi:10.16578/j.issn.1004.2539.2015.04.007

您当前的位置：

首页 >

文章列表页 >

Optimal Design of the Linkage Mechanism Simulation of Three-Roller Guiding Device

更新时间：2022-10-20

- Optimal Design of the Linkage Mechanism Simulation of Three-Roller Guiding Device
- Vol. 39, Issue 4, Pages: 70-76(2015)
- 作者机构：
  
  1. 湖北理工学院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2015.04.007
  CLC：
扫描看全文
[1]张轶蔚,严伟,汤立刚.三辊导向装置连杆机构的仿真优化设计[J].机械传动,2015,39(04):70-76.

Zhang Yiwei, Yang Wei, Tang Ligang. Optimal Design of the Linkage Mechanism Simulation of Three-Roller Guiding Device. [J]. 39(4):70-76(2015)
[1]张轶蔚,严伟,汤立刚.三辊导向装置连杆机构的仿真优化设计[J].机械传动,2015,39(04):70-76. DOI： 10.16578/j.issn.1004.2539.2015.04.007.

Zhang Yiwei, Yang Wei, Tang Ligang. Optimal Design of the Linkage Mechanism Simulation of Three-Roller Guiding Device. [J]. 39(4):70-76(2015) DOI： 10.16578/j.issn.1004.2539.2015.04.007.

摘要

为进一步完善三辊导向装置连杆机构的设计方法,在综合考虑设备的工艺要求、使用条件以及机构的传动性能的基础上,建立了多目标函数优化设计的数学模型。采用虚拟样机技术,利用ADAMS对完全参数化的机构模型进行了仿真优化以确定具有最优性能的设计参数。仿真结果表明,在给定的约束条件下,机构的综合工作性能得到显著改善。

Abstract

In order to improve the method to design the linkage mechanism of three-roller guiding device installed at the exit of piercing mill,the mathematical model of the multi objective optimal design is established based on comprehensive consideration of the technical requirement,the operation condition and the transmission performance of the mechanism.The fully parameterized virtual prototyping model of mechanism is optimized by simulation to determine the design parameter in the ADAMS environment.Under the given constraints,the simulation results show that the comprehensive performance of the mechanism is significantly improved.

关键词

三辊导向装置连杆机构虚拟样机ADAMS优化设计

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Optimization Design and Simulation of Planar Eight-link Mechanism based on ADAMS

Dynamics Analysis and Design of a type of Artillery Azimuth Angle Measuring Device

Design and Kinematic Simulation of the Transposition Mechanism of Wheelchair-hand Control System

Analysis of the Meshing Transmission Characteristic of the Drilling Rig Rotary Table Bevel Gear based on the Virtual Prototyping Technology

Link Group Parametric Modeling and Optimal Design in Multi-arm Mechanical Arm System

Related Author

No data

Related Institution

College of Mechanical Engineering,Panzhihua University

Northwest Institute of Mechanical & Electrical Engineering

School of Mechanical Engineering, Dalian Jiaotong University

Jingzhou Mind Science and Technology Co.,Ltd.

College of Mechanical and Electric Engineering,Wuhan University of Technology

⁰