直圆柔性铰链加工误差对刚度的影响和有限元验证

doi:10.16578/j.issn.1004.2539.2014.03.024

您当前的位置：

首页 >

文章列表页 >

直圆柔性铰链加工误差对刚度的影响和有限元验证

更新时间：2025-04-03

- 直圆柔性铰链加工误差对刚度的影响和有限元验证
- Vol. 38, Issue 3, Pages: 109-113(2014)
- 作者机构：
  
  浙江工业大学机械工程学院2. 中国计量科学研究院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2014.03.024
  CLC： TH132.45
- Published：2014
- 稿件说明：
移动端阅览
[1]钱晓力,高思田,李伟,欧长劲.直圆柔性铰链加工误差对刚度的影响和有限元验证[J].机械传动,2014,38(03):109-113.

[J]. 2014, 38(3): 109-113.
[1]钱晓力,高思田,李伟,欧长劲.直圆柔性铰链加工误差对刚度的影响和有限元验证[J].机械传动,2014,38(03):109-113. DOI： 10.16578/j.issn.1004.2539.2014.03.024.

[J]. 2014, 38(3): 109-113. DOI： 10.16578/j.issn.1004.2539.2014.03.024.

摘要

柔性铰链是一种行程小

定位精度高的传动机构

对加工精度有较高的要求。针对柔性铰链关键尺寸3种不同的加工误差

通过建模和受力分析

推导了直圆柔性铰链存在加工误差时的转动刚度计算公式

以数值积分方法计算刚度误差

并拟合出一种无量纲的刚度误差公式。同时以有限元仿真对计算公式进行验证

对误差曲线进行比较

结果表明了较好的一致性

为柔性铰链的设计和加工提供参考。

Abstract

Flexure hinge has the characteristics of small stroke and high positioning precision and has higher requirement on machining accuracy.Aiming at the three machining errors of flexure hinge key size

through modeling and force analysis

the calculation formula of rotation stiffness of circular flexure hinge considering the machining errors is derived.The stiffness error is calculated by using numerical integration method

and a kind of non-dimensional stiffness error calculation formula is fit out.Meanwhile

the verification on the formula is carried out by using finite element simulation.The stiffness errors of numerical analysis method are compared with and FEA method

the results show that it has good consistency

and a reference for flexure hinge design and machining is provided.

关键词

Keywords

references

Views

143

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design and Finite Element Analysis of 2-D Micro Displacement Worktable based on Two-direction Planar Four-bar Linkage

Analysis of the Influence of Straight Beam Flexible Hinge Structure Parameter on the Stiffness

Thread Tooth Modification of the Inverted Planetary Roller Screw Mechanism

弹性圈高速行星牵引传动机构

Machining Error Analysis and Precision Measure of Small Module Bevel Gears

Related Author

Bao Liya1

2 Hao Yongping2 Zhang Jiayi2 Hu Yanli3

张嘉易

胡延丽

Yang Chunhui

Qiao Guan

Hao Zhipeng

Liao Rong

Related Institution

1 Huaibei Vocational & Technical College

沈阳理工大学CAD/CAM技术研究与开发中心

北方重工沈矿集团设计研究院

School of Railway Tracks and Trarsportation,East China Jiaotong University

Inner Mongolia Key Laboratory of Advanced Manufacturing Technology, Inner Mongolia University of Technology

⁰