行星滚柱丝杠副轴向弹性变形的有限元分析

doi:10.16578/j.issn.1004.2539.2012.07.021

您当前的位置：

首页 >

文章列表页 >

行星滚柱丝杠副轴向弹性变形的有限元分析

更新时间：2025-04-03

- 行星滚柱丝杠副轴向弹性变形的有限元分析
- Vol. 36, Issue 7, Pages: 78-81+98(2012)
- 作者机构：
  
  西北工业大学机电学院
- 作者简介：
- 基金信息：
- DOI：10.16578/j.issn.1004.2539.2012.07.021
  CLC： TH132.425
- Published：2012
- 稿件说明：
移动端阅览
[1]马尚君,刘更,佟瑞庭,张晓彩.行星滚柱丝杠副轴向弹性变形的有限元分析[J].机械传动,2012,36(07):78-81+98.

[J]. 2012, 36(7): 78-81+98.
[1]马尚君,刘更,佟瑞庭,张晓彩.行星滚柱丝杠副轴向弹性变形的有限元分析[J].机械传动,2012,36(07):78-81+98. DOI： 10.16578/j.issn.1004.2539.2012.07.021.

[J]. 2012, 36(7): 78-81+98. DOI： 10.16578/j.issn.1004.2539.2012.07.021.

摘要

以行星滚柱丝杠副为研究对象

综合考虑螺纹牙接触角和螺旋升角的影响

利用有限元方法计算轴向弹性变形

将有限元解和解析解进行对比

最大误差为4.85%。在此基础上

分析了不同轴向负载作用下接触角和螺旋升角对轴向弹性变形的影响。结果表明

轴向弹性变形中

赫兹接触变形为主要变形;螺纹牙的弹性变形和von Miese应力变化趋势一致

且呈现明显的载荷分布;轴向变形随着接触角和螺旋升角的增大而减小。可见

合理增大接触角和螺旋升角有利于提高行星滚柱丝杠副的传动精度。

Abstract

By taking a planetary roller screw as the research object

the influence of contact angle and helix angle on axial elastic deformation are considered

and the axial elastic deformation of screw pair are calculated with finite element method.It is concluded that the results of finite element calculation and the theoretical calculation are approximate

and the maximal error is 4.85%.The effects of contact angle and helix angle on axial elastic deformation are analyzed under different axial load.Results show that the Hertz contact deformation is the main deformation of axial elastic deformation.Besides

the variation trend of elastic deformation is the same as that of the von Miese stress

the axial elastic deformation will be decreased duo to the increase of contact angle and helix angle

therefore

moderate contact angle and helix angle are favorable to promote transmission accuracy of planetary roller screw.

关键词

Keywords

references

Views

381

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

渐开线直齿圆柱齿轮的刚度精密分析方法及其影响因素探讨

Thread Tooth Modification of the Inverted Planetary Roller Screw Mechanism

弹性圈高速行星牵引传动机构

用计算啮合节点位置法进行剃齿刀中凹修形

斜齿轮多对齿啮合的快速优化与有限元分析研究

Related Author

赵东升

汪中厚

张立平

周鹤群

谢云波

Qiao Guan

Hao Zhipeng

Liao Rong

Related Institution

上海理工大学机械工程学院

Shaanxi Engineering Laboratory for Transmissions and Controls, Northwestern Polytechnical University

Inner Mongolia Key Laboratory of Advanced Manufacturing Technology, Inner Mongolia University of Technology

西华大学交通与汽车工程学院

山西大学工程学院2. 太原科技大学机电工程学院

⁰